English Version
浏览量 : 41 下载量: 71 CSCD: 6
  • 导出

  • 分享

  • 收藏

  • 专辑

    • LSM法制备TiB2/Al-7Si复合材料的研究

    • Research on TiB\-2/Al 7Si Composite Fabricated by LSM Method

    • 赵芳欣

      1

      李德成

      1

      张瑛洁

      1

      尹绍奎

      1

      李玉胜

      1
    • 1999年第5期 页码:10-11   

      纸质出版日期: 1999

    扫 描 看 全 文

  • 引用

  • [1]赵芳欣,李德成,张瑛洁,尹绍奎,李玉胜.LSM法制备TiB_2/Al-7Si复合材料的研究[J].特种铸造及有色合金,1999(05):10-11. DOI:
    Zhao Fangxin\ Li Decheng\ Zhang Yingjie\ Yin Shaokui\ Li Yusheng. Research on TiB\-2/Al 7Si Composite Fabricated by LSM Method[J]. Special Casting & Nonferrous Alloys, 1999,(5):10-11. DOI:
  •  
  •  
    论文导航

    摘要

    研究了LSM 法制备 TiB2 粒子增强AlSi7 复合材料的物相组成;考察了TiB2 粒子对热处理组织与性能的影响。研究结果表明,按K2TiF6 + 2KBF4= TiB2 + 4KF+ 5F2 反应式计算,在w (TiB2)为5% 时,在复合材料中可以生成稳定且均匀分布的TiB2 粒子,未发现TiAl3 等相。材料的杨氏模量由72.3 GPa 提高至96.8 GPa。TiB2 粒子对热处理组织与性能无明显影响

    Abstract

    The TiB\-2/Al 7Si composite was fabricated by LSM method.The phase analysis of the composite was carried out by XRD. The effect of TiB\-2 particulate on heat treated properties and structures was examined. The results showed that TiB\-2 particulates distribute in the composite stably and homogeneously with nominal w (TiB\-2)=5% addition calculated by K\-2TiF\-6+2KBF4=TiB2+4KF+5F\-2.No phase as TiAl\-3 has been found. Young′s modulus increaes from 72.3 GPa to 96.8 GPa. TiB\-2 particulates have no obvious effects on the heat treated structure and properties.

    关键词

    LSM法; 铝基复合材料; TiB2

    Keywords

    LSM Method; Aluminum Matrix Composite; TiB\-2

    文章被引用时,请邮件提醒。
    提交

    相关作者

    马荣生   四川大学  ;  成都动力配件股份有限公司  
    涂铭旌   四川大学  ;  成都动力配件股份有限公司  
    高升吉   四川大学  ;  成都动力配件股份有限公司  
    赵平   四川大学  ;  成都动力配件股份有限公司  
    沈保罗   四川大学  ;  成都动力配件股份有限公司  
    朱秀荣   中国兵器工业第五二研究所宁波分所  
    王荣   中国兵器工业第五二研究所宁波分所  
    费良军   中国兵器工业第五二研究所宁波分所  

    相关机构

      成都动力配件股份有限公司  
      四川大学  
      中国兵器工业第五二研究所宁波分所  
      中国兵器工业第五二研究所波分所  
      东南大学  
    0