Monte Carlo方法在定向凝固模拟中的应用

丁雨田; 王海南; 许广济; 李传军

浏览量 : 0 下载量: 187 CSCD: 4

导出
分享
收藏
专辑

Monte Carlo方法在定向凝固模拟中的应用
Application of Monte Carlo Method for the Microstructure Simulation of Directional Solidification
2001年第2期页码：83-85
纸质出版日期： 2001 ，
DOI：

扫描看全文

[1]丁雨田,王海南,许广济,李传军.Monte Carlo方法在定向凝固模拟中的应用[J].特种铸造及有色合金,2001(02):83-85+1.

Ding Yutian Wang Hainan Xu Guangji Li Chuanjun. Application of Monte Carlo Method for the Microstructure Simulation of Directional Solidification[J]. Special Casting & Nonferrous Alloys, 2001,(2):83-85.
[1]丁雨田,王海南,许广济,李传军.Monte Carlo方法在定向凝固模拟中的应用[J].特种铸造及有色合金,2001(02):83-85+1. DOI：

Ding Yutian Wang Hainan Xu Guangji Li Chuanjun. Application of Monte Carlo Method for the Microstructure Simulation of Directional Solidification[J]. Special Casting & Nonferrous Alloys, 2001,(2):83-85. DOI：

摘要

应用MonteCarlo方法模拟了定向凝固条件下微观组织的形成过程

同时还模拟了双向凝固

四边由表面向中心凝固及整体凝固的微观组织形成过程

模拟结果与实际情况非常接近。同时分析了MonteCarlo方法用于微观组织模拟存在的问题和不足之处

Abstract

The forming processes of microstructure under uni directional

bi directional

multi directional and overall solidification conditions were simulated with Monte Carlo method. The simulation results were close to the realities. The problems and failures of Monte Carlo method used for simulation of microstructure were analyzed also.