电脉冲变质处理对ZL108合金性能的影响

曹丽云; 王建中; 刘兴江; 杨小平; 陈淑英; 周大奇

浏览量 : 0 下载量: 133 CSCD: 7

导出
分享
收藏
专辑

电脉冲变质处理对ZL108合金性能的影响
Influence of Electro-pulsing Modification on the Microstructure and Properties of Zl108 Alloy
2001年第4期页码：10-11
纸质出版日期： 2001 ，
DOI：

扫描看全文

[1]曹丽云,王建中,刘兴江,杨小平,陈淑英,周大奇.电脉冲变质处理对ZL108合金性能的影响[J].特种铸造及有色合金,2001(04):10-11+2.

Cao Liyun Wang Jianzhong Liu Xingjiang Yang Xia oping Chen Shuying Zhou Daqi. Influence of Electro-pulsing Modification on the Microstructure and Properties of Zl108 Alloy[J]. Special Casting & Nonferrous Alloys, 2001,(4):10-11.
[1]曹丽云,王建中,刘兴江,杨小平,陈淑英,周大奇.电脉冲变质处理对ZL108合金性能的影响[J].特种铸造及有色合金,2001(04):10-11+2. DOI：

Cao Liyun Wang Jianzhong Liu Xingjiang Yang Xia oping Chen Shuying Zhou Daqi. Influence of Electro-pulsing Modification on the Microstructure and Properties of Zl108 Alloy[J]. Special Casting & Nonferrous Alloys, 2001,(4):10-11. DOI：

摘要

在液态条件下对ZL10 8合金进行电脉冲变质处理

结果表明 :经电脉冲变质处理（EPM）后

ZL10 8合金的凝固组织呈现磷变质的特征

经热处理后

力学性能明显提高

说明该技术可以作为一种变质处理的替代方法应用于为提高合金耐磨性的ZL10 8合金中

并表现出良好的抗衰退性。

Abstract

Electro-pulsing modification on liquid ZL108 alloy was conducted.The results showed that the solidification microstructure of electro -pulsing modified ZL108 alloy exhibited P modification characteristics.The mech anical properties of heat treated alloy is raised significantly.The given techno logy was a substitutive modification method to be applied to improve the wear re sistance and anti-fading capacity of ZL108 alloy.