铁型覆砂球墨铸铁件凝固模拟及收缩缺陷预测

梁作俭; 赵海东; 柳百成; 李贵来; 张志坚

浏览量 : 0 下载量: 253 CSCD: 3

导出
分享
收藏
专辑

铁型覆砂球墨铸铁件凝固模拟及收缩缺陷预测
Solidification Simulation and Shrinkage Defect Prediction of S.G. Iron Casting in Sand Lined Metal Mold
2001年第5期页码：25-27
纸质出版日期： 2001 ，
DOI：

扫描看全文

[1]梁作俭,,,,,,,,,,赵海东,,,,,,,,,,柳百成,,,,,,,,,,李贵来,,,,,,,,,,张志坚.铁型覆砂球墨铸铁件凝固模拟及收缩缺陷预测[J].特种铸造及有色合金,2001(05):25-27+2-1.

Liang Zuojian Zhao Haidong Liu Baicheng. Solidification Simulation and Shrinkage Defect Prediction of S.G. Iron Casting in Sand Lined Metal Mold[J]. Special Casting & Nonferrous Alloys, 2001,(5):25-27.
[1]梁作俭,,,,,,,,,,赵海东,,,,,,,,,,柳百成,,,,,,,,,,李贵来,,,,,,,,,,张志坚.铁型覆砂球墨铸铁件凝固模拟及收缩缺陷预测[J].特种铸造及有色合金,2001(05):25-27+2-1. DOI：

Liang Zuojian Zhao Haidong Liu Baicheng. Solidification Simulation and Shrinkage Defect Prediction of S.G. Iron Casting in Sand Lined Metal Mold[J]. Special Casting & Nonferrous Alloys, 2001,(5):25-27. DOI：

摘要

建立了铁型覆砂铸造凝固过程模拟的数学模型。采用动态膨胀收缩法（DECAM）和K·G/R判据预测球墨铸铁件的收缩缺陷

对球墨铸铁四缸曲轴新产品进行了模拟计算

根据模拟结果对原有工艺方案进行了改进

并在实际生产中得到了合格的铸件。结果表明

对铁型覆砂球墨铸铁件进行数值模拟和工艺优化

有助于提高铸件质量

缩短试制周期

降低工装费用

Abstract

The mathematical model for solidification process simulation in sand lined metal mold was established. The shrinkage defect of S.G.iron castings were predicted by dynamic expansion and contraction accumulation method （DECAM） and criterion of K·G/R . The simulation calculation for new S.G.iron four cylinder crankshaft was conducted using the model. Based on the simulation results

the initial technology was optimized and the sound casting has been produced in practical production. It was showed that it is helpful to improving casting quality

shortening trial production period

and decreasing tool cost through numerical simulation and process optimization for S.G iron casting in sand lined metal mold.