铸轧铝带的表层夹杂特征及其遗传危害

袁鸽成; 匡同春; 张洪云; 龙旭红; 陈明

浏览量 : 0 下载量: 101 CSCD: 1

导出
分享
收藏
专辑

铸轧铝带的表层夹杂特征及其遗传危害
Characteristics and Hereditary Harm of the Surface Inclusion in Cast rolling Aluminum Strip
2001年第3期页码：18-20
纸质出版日期： 2001 ，
DOI：

扫描看全文

[1]袁鸽成,匡同春,张洪云,龙旭红,陈明.铸轧铝带的表层夹杂特征及其遗传危害[J].特种铸造及有色合金,2001(03):18-20+2.

Yuan Gecheng Kuang Tongchun. Characteristics and Hereditary Harm of the Surface Inclusion in Cast rolling Aluminum Strip[J]. Special Casting & Nonferrous Alloys, 2001,(3):18-20.
[1]袁鸽成,匡同春,张洪云,龙旭红,陈明.铸轧铝带的表层夹杂特征及其遗传危害[J].特种铸造及有色合金,2001(03):18-20+2. DOI：

Yuan Gecheng Kuang Tongchun. Characteristics and Hereditary Harm of the Surface Inclusion in Cast rolling Aluminum Strip[J]. Special Casting & Nonferrous Alloys, 2001,(3):18-20. DOI：

摘要

采用SEM和EDAX分析技术

观察和分析了铸轧铝带的表层夹杂缺陷。结果表明

夹杂尺寸大约在 5～ 2 0 0 μn之间

夹杂含有O

Si等元素。原辅材料中的杂质、熔炼铸轧过程的污染及净化处理不当是形成夹杂的原因。表层夹杂的遗传将导致箔材断带和弥散性穿孔。严格控制和改进工艺

可以有效地防止夹杂形成

Abstract

The surface inclusion in cast rolling aluminum strip was observed and analyzed by means of SEM and EDAX. The results showed that the inclusion size ranges around 5～200μm and the inclusion consists of O

Si. Impurity in raw and auxiliary materials

pollution in smelting casting process and abnormally purified treatment are the reason of forming inclusion. Heredity of the surface inclusion results in aluminum foils cracking and forming dispersively penetrated hole. The formation of entrapped slag could be prevented effectively by strictly controlling and up grading the process