ZL108合金激光熔凝工艺的研究

崔红卫

浏览量 : 0 下载量: 80 CSCD: 1

导出
分享
收藏
专辑

ZL108合金激光熔凝工艺的研究
Laser Remelting/solidifying Process for ZL108 Alloy
2002年第3期页码：15-17
纸质出版日期： 2002 ，
DOI：

扫描看全文

[1]崔红卫.ZL108合金激光熔凝工艺的研究[J].特种铸造及有色合金,2002(03):15-17+2.

Cui Hongwei. Laser Remelting/solidifying Process for ZL108 Alloy[J]. Special Casting & Nonferrous Alloys, 2002,(3):15-17.
[1]崔红卫.ZL108合金激光熔凝工艺的研究[J].特种铸造及有色合金,2002(03):15-17+2. DOI：

Cui Hongwei. Laser Remelting/solidifying Process for ZL108 Alloy[J]. Special Casting & Nonferrous Alloys, 2002,(3):15-17. DOI：

摘要

用正交试验法确定了对ZL10 8活塞合金进行激光熔凝处理的工艺参数

如激光功率、扫描速度、光斑直径等。通过试验验证确定了最佳工艺参数

并设计了新型吸收涂层。分别用SiO2 涂层和w（Al2 O3） =40 %

w（SiO2 ） =40 %

w（C） =2 0 %的混合涂层涂敷的ZL10 8合金

激光处理后熔凝区深度和熔凝区宽度符合技术指标

熔凝区显微硬度也有较大提高

这主要是由于组织细化和固溶强化的缘故

这将有利于活塞性能的改善

Abstract

Technological parameters

including laser power P

scanning velocity v

laser beam diameter D

in laser remelting/solidifying treatment for ZL108 alloy piston were determined by orthogonal experimental technique. The optimum parameters were established by verifiable experiment and two new absorptive coatings were designed. Depth and width of the treated zone on ZL108 alloy precoated with SiO 2 coating and 40%Al 2O 3 +40%SiO 2 +20% C coating respectively were in coincidence with technological index. Due to the microstructure refinement and solid solution strengthening

the greatly elevated micro hardness of treated zone was beneficial to improving the piston properties.