Cu-Ti-B粉末的机械合金化

董仕节; 史耀武; 雷永平

浏览量 : 0 下载量: 142 CSCD: 1

导出
分享
收藏
专辑

Cu-Ti-B粉末的机械合金化
Mechanical Alloying of Cu-Ti-B Powders
2002年第3期页码：20-23
纸质出版日期： 2002 ，
DOI：

扫描看全文

[1]董仕节,,,,,,,,,,史耀武,,,,,,,,,,雷永平.Cu-Ti-B粉末的机械合金化[J].特种铸造及有色合金,2002(03):20-23+2.

Dong Shijie. Mechanical Alloying of Cu-Ti-B Powders[J]. Special Casting & Nonferrous Alloys, 2002,(3):20-23.
[1]董仕节,,,,,,,,,,史耀武,,,,,,,,,,雷永平.Cu-Ti-B粉末的机械合金化[J].特种铸造及有色合金,2002(03):20-23+2. DOI：

Dong Shijie. Mechanical Alloying of Cu-Ti-B Powders[J]. Special Casting & Nonferrous Alloys, 2002,(3):20-23. DOI：

摘要

采用X射线衍射、扫描电子显微镜、透射电子显微镜研究了Cu Ti B粉末在机械合金化过程中的结构变化。结果表明 :Cu Ti B混合粉末随机械合金化时间的增加

粉末颗粒和α Cu的晶粒尺寸不断细化、应变不断增加 ;机械合金化可以加大Ti和B在α Cu中的固溶度

B的加入促进了Ti在α Cu中的溶解

使Cu Ti B粉末机械合金化的进程加快。

Abstract

The structural transformation of Cu Ti B mixed powders during mechanical alloying has been investigated by XRD

SEM and TEM. The results showed that powder particles and α Cu grain sizes in Cu Ti B mixed powder were fined and strain was increased continuously with the increase of mechanical alloying time. The dissolvability of Ti and B in α Cu could be enhanced through mechanical alloying. B addition could promote the dissolution of Ti in α Cu so as to accelerate the mechanical alloying process of Cu Ti B powder.