Tan Dunqiang Li Wenxian. Effects of Temperature on Preparation of Al-Ti-C Grain Refiner[J]. Special Casting & Nonferrous Alloys, 2002,(5):4-7.DOI:
温度对制备Al-Ti-C晶粒细化剂的影响
摘要
采用石墨粉加入到Al Ti合金中的方法来制备Al Ti C晶粒细化剂。采用扫描电镜和透射电镜观察了Al Ti C合金的微观形貌
采用X射线衍射装置检测了Al Ti C合金中的相组成。结果表明
在制备Al Ti C合金过程中
温度低于 12 73K先生成TiC粒子
随着保温时间的延长TiC转变成为Al4C3 ;但温度升高到 15 73K以上时
Al4C3 会分解重生成TiC。
Abstract
Al Ti C grain refiner was prepared by adding graphite powder in Al Ti alloy. The microstructure of Al Ti C alloy was observed by means of TEM
SEM and phase constituents of the refiner was detected by X ray. The results showed that TiC particle was firstly generated below 1 273 K and then transformed into Al 4C 3 with prolonging holding time while Al 4C 3 would be decomposed into TiC again over 1 573 K.