汽车铝合金压铸件质量的综合诊断和控制

赵毅; 曾大本; 唐靖林; 李双寿

浏览量 : 0 下载量: 140 CSCD: 4

导出
分享
收藏
专辑

汽车铝合金压铸件质量的综合诊断和控制
Comprehensive Diagnosis and Control for the Quality of Automobile Aluminum Die Castings
2002年第5期页码：32-34
纸质出版日期： 2002 ，
DOI：

扫描看全文

[1]赵毅,,,,,,,,,,曾大本,唐靖林,李双寿.汽车铝合金压铸件质量的综合诊断和控制[J].特种铸造及有色合金,2002(05):32-34+1.

Zhao Yi Zeng Daben Tang Jinglin Li Shaungshou. Comprehensive Diagnosis and Control for the Quality of Automobile Aluminum Die Castings[J]. Special Casting & Nonferrous Alloys, 2002,(5):32-34.
[1]赵毅,,,,,,,,,,曾大本,唐靖林,李双寿.汽车铝合金压铸件质量的综合诊断和控制[J].特种铸造及有色合金,2002(05):32-34+1. DOI：

Zhao Yi Zeng Daben Tang Jinglin Li Shaungshou. Comprehensive Diagnosis and Control for the Quality of Automobile Aluminum Die Castings[J]. Special Casting & Nonferrous Alloys, 2002,(5):32-34. DOI：

摘要

借助统计分析、理化分析以及工艺仿真等综合分析手段

以正时齿轮室压铸件为例

对压铸缺陷以及工艺过程的可变性进行综合诊断

确定了缺陷的性态、产生规律及原因。并在此基础上

针对整个压铸生产过程提出了相应的改进措施和工艺优化方案

使压铸件质量得到明显改善。结果表明

上述综合分析手段

可以有效地为压铸件的缺陷分析和质量控制提供依据

Abstract

Die casting is a complicated process effected by numerous factors. A single method for quality control used not to achieve desired effect. The comprehensive diagnosis for diecasting defects

e.g. in aluminum time gear case and varying technological process are carried out with the combination of statistic

physico chemical analysis as well as technical simulation to determine character

regulation and reason for defect formation. On this basis

quality of the diecastings was improved remarkably through corresponding amelioration and optimization of casting process for the whole die casting. The results showed that the above mentioned comprehensive methods effectively provided the evidence for diecasting defect analysis and quality control.