消失模精密铸造工艺研究

袁子洲; 张劲松; 陈秀娟

浏览量 : 0 下载量: 482 CSCD: 10

导出
分享
收藏
专辑

消失模精密铸造工艺研究
Lost Foam Pattern for Investment Casting Technology
2003年第4期页码：46-47
纸质出版日期： 2003 ，
DOI：

扫描看全文

[1]袁子洲,,,,,,,,,,张劲松,,,,,,,,,,陈秀娟.消失模精密铸造工艺研究[J].特种铸造及有色合金,2003(04):46-47+70.

Yuan Ziz hou Zhang Jinsong Chen Xiujuan. Lost Foam Pattern for Investment Casting Technology[J]. Special Casting & Nonferrous Alloys, 2003,(4):46-47.
[1]袁子洲,,,,,,,,,,张劲松,,,,,,,,,,陈秀娟.消失模精密铸造工艺研究[J].特种铸造及有色合金,2003(04):46-47+70. DOI：

Yuan Ziz hou Zhang Jinsong Chen Xiujuan. Lost Foam Pattern for Investment Casting Technology[J]. Special Casting & Nonferrous Alloys, 2003,(4):46-47. DOI：

摘要

借助熔模铸造制壳工艺制成消失模铸造用的超薄空腔型壳

以减少消失模铸造在浇注过程中因聚苯乙烯气化而产生的铸件增碳、增氢等缺陷。聚苯乙烯模失模工艺为随炉升温至 60 0℃

保温 60min。型壳焙烧工艺为 80 0℃焙烧 1h。

Abstract

Expendable polystyrene pattern（EPC） was used for mold s hell making in EPC by means of shell making technology similar to wax pat tern ininvestment casting to reduce carburization and hydrogen pick up in EPC so a result of polystyrene vaporization during pouring. Polystyrene pattern was lost with heating up to 600 ℃ for 60 min holding

and shell was baked at 800 ℃ for 1 h.

关键词

精密铸造聚苯乙烯泡沫塑料水玻璃消失模

Keywords

Lost Foam PatternInvestment CastingPolystyreneSodiu m Silicate

references

文章被引用时，请邮件提醒。

提交

暂无数据