铝合金消失模真空低压铸造的充型特征

胡敏; 樊自田; 张大付; 董选普; 黄乃瑜

浏览量 : 0 下载量: 275 CSCD: 5

导出
分享
收藏
专辑

铝合金消失模真空低压铸造的充型特征
Mold Filling Characteristics of Al Alloy in Vacuum Lost Foam Low Pressure Casting
2003年第2期页码：56-58
纸质出版日期： 2003 ，
DOI：

扫描看全文

[1]胡敏,,,,,,,,,,樊自田,,,,,,,,,,张大付,,,,,,,,,,董选普,,,,,,,,,,黄乃瑜.铝合金消失模真空低压铸造的充型特征[J].特种铸造及有色合金,2003(02):56-58+0.

Hu Min Fan Zitian Zhang Dafu Dong Xuanpu Huang Naiyu. Mold Filling Characteristics of Al Alloy in Vacuum Lost Foam Low Pressure Casting[J]. Special Casting & Nonferrous Alloys, 2003,(2):56-58.
[1]胡敏,,,,,,,,,,樊自田,,,,,,,,,,张大付,,,,,,,,,,董选普,,,,,,,,,,黄乃瑜.铝合金消失模真空低压铸造的充型特征[J].特种铸造及有色合金,2003(02):56-58+0. DOI：

Hu Min Fan Zitian Zhang Dafu Dong Xuanpu Huang Naiyu. Mold Filling Characteristics of Al Alloy in Vacuum Lost Foam Low Pressure Casting[J]. Special Casting & Nonferrous Alloys, 2003,(2):56-58. DOI：

摘要

试验研究了反重力浇注条件下

铝合金消失模真空低压铸造的充型流动特性。通过采用电极触点法测定不同条件（真空度、浇注温度、内浇道面积）下铝合金液体流动前沿的变化规律

获得了不同条件下液态ZL10 1的充型等时曲线 ;分析了影响铝合金消失模真空低压铸造充型形态的主要因素。

Abstract

Mold filling characteristics of Al alloy in vacuum lost foam low pressure casting （VLFLPC） under counter gravity condition were examined. A variety of the regulations along with the flowing front of ZL101 Al melt and the corresponding filling is time curves in the VLFLPC at various conditions

including vacuum rate

pouring temperature

in gate area

were made with electrode touching dot method. The effects of key factors on filling behaviors of liquid Al alloy in the VLFLPC were analyzed.