强化处理对Al2O3/SiO2陶瓷型芯高温变形的影响

赵红亮; 翁康荣; 关绍康; 楼琅洪; 李英敖; 赵惠田; 胡壮麒

浏览量 : 0 下载量: 240 CSCD: 5

导出
分享
收藏
专辑

强化处理对Al₂O₃/SiO₂陶瓷型芯高温变形的影响
Influence of Strengthening Treatment on the Deformation of Al₂O₃/SiO₂ Nano-compound Ceramic Core at High Temperature
2003年第5期页码：7-8
纸质出版日期： 2003 ，
DOI：

扫描看全文

[1]赵红亮,翁康荣,关绍康,楼琅洪,李英敖,赵惠田,胡壮麒.强化处理对Al_2O_3/SiO_2陶瓷型芯高温变形的影响[J].特种铸造及有色合金,2003(05):7-8+65.

Zhao Hongliang Weng Kangrong Guan Shaokang. Influence of Strengthening Treatment on the Deformation of Al₂O₃/SiO₂ Nano-compound Ceramic Core at High Temperature[J]. Special Casting & Nonferrous Alloys, 2003,(5):7-8.
[1]赵红亮,翁康荣,关绍康,楼琅洪,李英敖,赵惠田,胡壮麒.强化处理对Al_2O_3/SiO_2陶瓷型芯高温变形的影响[J].特种铸造及有色合金,2003(05):7-8+65. DOI：

Zhao Hongliang Weng Kangrong Guan Shaokang. Influence of Strengthening Treatment on the Deformation of Al₂O₃/SiO₂ Nano-compound Ceramic Core at High Temperature[J]. Special Casting & Nonferrous Alloys, 2003,(5):7-8. DOI：

摘要

研究了强化处理对Al2 O3 /SiO2 纳米复合陶瓷型芯高温变形的影响规律

结果表明 :强化处理对Al2 O3 /SiO2 纳米复合陶瓷型芯高温变形的影响很大

15 5 0℃保温 1h的高温挠度由强化前的 7mm降至强化后的 1mm。强化剂的浓度对陶瓷型芯高温变形的影响不明显

强化次数对陶瓷型芯高温变形的影响相对较大。强化后的陶瓷型芯中出现了莫来石新生片状晶

减少了型芯的高温变形。

Abstract

Influence of strengthening treatment on the deformation of Al 2O 3/SiO 2 nano-compound ceramic core at high temperature was examined. The results showed that the strengthening treatment has great effect on the deformation of Al 2O 3/SiO 2 nano-compound ceramic core at high temperature. The deflection of the ceramic core at 1 550 ℃ for 1 h dropped from 7 mm to 1 mm before and after being strengthened. Concentration of the strengthening agent has a little effect on the deformation of the ceramic core while the strengthening times has relatively great effect.Lamellar mullite crystal microstructure appeared in the fracture surface of strengthened ceramic core

resulting in the core deformation decrease at high temperature.

关键词

强化纳米复合陶瓷型芯高温变形

Keywords

Strengthening TreatmentNano-compound Ceramic CoreDeformation at High Temperature

references

文章被引用时，请邮件提醒。

提交

空心叶片用陶瓷型芯