消失模冷粘结模具的三维造型与设计

王文权; 叶升平; 吴志超

浏览量 : 0 下载量: 60 CSCD: 1

导出
分享
收藏
专辑

消失模冷粘结模具的三维造型与设计
3-D Modeling for Cold Felting Mold Design in Lost Foam Casting
2002年第6期页码：17-18
纸质出版日期： 2002 ，
DOI：

扫描看全文

[1]王文权,叶升平,吴志超.消失模冷粘结模具的三维造型与设计[J].特种铸造及有色合金,2002(06):17-18+2.

Wang Wenquan Ye Shengping Wu Zhichao. 3-D Modeling for Cold Felting Mold Design in Lost Foam Casting[J]. Special Casting & Nonferrous Alloys, 2002,(6):17-18.
[1]王文权,叶升平,吴志超.消失模冷粘结模具的三维造型与设计[J].特种铸造及有色合金,2002(06):17-18+2. DOI：

Wang Wenquan Ye Shengping Wu Zhichao. 3-D Modeling for Cold Felting Mold Design in Lost Foam Casting[J]. Special Casting & Nonferrous Alloys, 2002,(6):17-18. DOI：

摘要

运用现代辅助设计方法———三维造型

完成了复杂箱体消失模冷粘结模的设计。结果表明

采用参数化的三维造型方法使模具设计柔性强、周期短

并为后续的模具制造提供了可靠的数据流

Abstract

Design of the cold felting mold for complicated case in lost foam casting was carried out successfully using 3-D modeling. The results showed that parametrized 3-D modeling not only has the advantages of making mold design more flexible and highly effective but also can provide reliable data stream for the subsequent mold manufacture.