铝合金再生炉电磁搅拌的模拟分析

刘丽平; 许光明; 史立锋; 李业欣; 陈雪莲; 韩建芬; 崔建忠

浏览量 : 0 下载量: 160 CSCD: 1

导出
分享
收藏
专辑

铝合金再生炉电磁搅拌的模拟分析
Simulation Analysis of Electromagnetic Stirring for Al Alloy
2005年第3期页码：143-145
纸质出版日期： 2005 ，
DOI：

扫描看全文

[1]刘丽平,许光明,史立锋,李业欣,陈雪莲,韩建芬,崔建忠.铝合金再生炉电磁搅拌的模拟分析[J].特种铸造及有色合金,2005(03):143-145+126.

Liu Liping Xu Guangming Shi Lifeng Li Yexin Chen Xuelian Han Jianfen Cui Jianzhong. Simulation Analysis of Electromagnetic Stirring for Al Alloy[J]. Special Casting & Nonferrous Alloys, 2005,(3):143-145.
[1]刘丽平,许光明,史立锋,李业欣,陈雪莲,韩建芬,崔建忠.铝合金再生炉电磁搅拌的模拟分析[J].特种铸造及有色合金,2005(03):143-145+126. DOI：

Liu Liping Xu Guangming Shi Lifeng Li Yexin Chen Xuelian Han Jianfen Cui Jianzhong. Simulation Analysis of Electromagnetic Stirring for Al Alloy[J]. Special Casting & Nonferrous Alloys, 2005,(3):143-145. DOI：

摘要

铝合金废料在回收熔化过程中容易受到空气的氧化

影响铝合金的品质

而且容易引起密度不均

需要进行搅拌来改善铝合金废料的品质。电磁搅拌是一种比较理想的搅拌方式。通过对搅拌器的磁场和流场的模拟及对电磁搅拌器在具有不同相位角时熔体的受力情况和流动情况的模拟

得出了电磁搅拌器的最佳工艺参数

即当两组线圈的相位角均为90°

频率为 15～ 2 0Hz时

能够得到最佳的搅拌效果。

Abstract

It is needed to improve the quality of scrap aluminum alloy by stirring because of the easy oxidation during remelting process influencing the quality and resulting in uneven density distribution.It is an ideal method to stirring by electromagnetic stirring.The optimized parameters

including 90° phase angle between two sets coils

frequency of 15～20 Hz

for electromagnetic stirrer can be obtained by the simulation of magnetic field and flow field in the stirrer

which provides a referrence for practical production.