燃烧合成焊接钢/不锈钢焊缝结构及形成机制

刘晓涛; 张廷安; 崔建忠

浏览量 : 0 下载量: 103 CSCD: 0

导出
分享
收藏
专辑

燃烧合成焊接钢/不锈钢焊缝结构及形成机制
The Structure of Weld Seam and Formation Mechanism of 08Al Steel/stainless Steel Welded with TiNi Synthesized by Pressurized Combustion
2003年第4期页码：14-15
纸质出版日期： 2003 ，
DOI：

扫描看全文

[1]刘晓涛,,,,,,,,,,张廷安,,,,,,,,,,崔建忠.燃烧合成焊接钢/不锈钢焊缝结构及形成机制[J].特种铸造及有色合金,2003(04):14-15+68.

Liu Xiaotao Zhang Ting’an Cui Jianzhong. The Structure of Weld Seam and Formation Mechanism of 08Al Steel/stainless Steel Welded with TiNi Synthesized by Pressurized Combustion[J]. Special Casting & Nonferrous Alloys, 2003,(4):14-15.
[1]刘晓涛,,,,,,,,,,张廷安,,,,,,,,,,崔建忠.燃烧合成焊接钢/不锈钢焊缝结构及形成机制[J].特种铸造及有色合金,2003(04):14-15+68. DOI：

Liu Xiaotao Zhang Ting’an Cui Jianzhong. The Structure of Weld Seam and Formation Mechanism of 08Al Steel/stainless Steel Welded with TiNi Synthesized by Pressurized Combustion[J]. Special Casting & Nonferrous Alloys, 2003,(4):14-15. DOI：

摘要

将燃烧合成技术与传统焊接技术相结合

以Ti Ni体系为连接材料研究了 0 8钢 /1Cr1 8Ni9不锈钢焊接焊缝的形成过程

探索了Ti Ni加压燃烧合成的过程及产物的形成机制

焊缝与基体的结合行为。目的在于开发出一种新型层状金属复合材料的制备工艺

Abstract

Correlating combustion synthesis with traditional weldi ng technology

the formation process of welding seam of 08Al steel/1Cr18Ni9 stai nless steel welded with joint materials of Ti Ni system was investigated. The p rocess of pressurized combustion synthesis of Ti Ni and the mechanism of its pr oduct formation

joint behavior between matrix and weld seam and fracture morpho logy of the seam were explored to develop a new preparation technique for cladding metal composites.