压铸模具材料抗粘模试验

顾金声

浏览量 : 0 下载量: 108 CSCD: 1

导出
分享
收藏
专辑

压铸模具材料抗粘模试验
Experiment on Soldering-resistance of Die Materials in Die Casting
2003年第6期页码：41-42
纸质出版日期： 2003 ，
DOI：

扫描看全文

[1]顾金声.压铸模具材料抗粘模试验[J].特种铸造及有色合金,2003(06):41-42+69.

Gu Jinsheng. Experiment on Soldering-resistance of Die Materials in Die Casting[J]. Special Casting & Nonferrous Alloys, 2003,(6):41-42.
[1]顾金声.压铸模具材料抗粘模试验[J].特种铸造及有色合金,2003(06):41-42+69. DOI：

Gu Jinsheng. Experiment on Soldering-resistance of Die Materials in Die Casting[J]. Special Casting & Nonferrous Alloys, 2003,(6):41-42. DOI：

摘要

叙述了钨基合金在铝合金液中的抗蚀性试验情况。结果表明

钨基合金对铝合金液的抗蚀性能比 3Cr2W8V钢和45号钢高

在 64 0～ 740℃的温度范围内提高达 10倍以上

所以钨基合金可用来做深腔或在浇道开设时不能避免合金液冲刷型面的模具材料

对形状复杂的薄壁件则更为有利

Abstract

Experiment on corrosion resistance of W based alloy in liquid Al alloy was conduced. The results showed that corrosion resistance of W based alloy in liquid Al alloy is superior to 3Cr2W8V and 45# steel

especially higher by about 10 times than those of 3Cr2W8V and 45# steel at temperature ranging from 640 to 740℃. Therefore

W based alloy can be used for the die with deep cavity or the die surface subjected to washing away from liquid alloy during ingate setup

and especially for the die in thin walled complicated casting.