AZ91D镁合金半固态浆料制备的研究

徐跃; 康永林; 王朝辉; 董文超; 刘津伟

浏览量 : 0 下载量: 254 CSCD: 17

导出
分享
收藏
专辑

AZ91D镁合金半固态浆料制备的研究
Preparation of Semi-solid Slurry of AZ91D Mg Alloy
2004年第5期页码：12-14
纸质出版日期： 2004 ，
DOI：

扫描看全文

[1]徐跃,康永林,王朝辉,董文超,刘津伟.AZ91D镁合金半固态浆料制备的研究[J].特种铸造及有色合金,2004(05):12-14+1.

Xu Yue Kang Yonglin Wang Zhaohui Dong Wenchao Liu Jinwei. Preparation of Semi-solid Slurry of AZ91D Mg Alloy[J]. Special Casting & Nonferrous Alloys, 2004,(5):12-14.
[1]徐跃,康永林,王朝辉,董文超,刘津伟.AZ91D镁合金半固态浆料制备的研究[J].特种铸造及有色合金,2004(05):12-14+1. DOI：

Xu Yue Kang Yonglin Wang Zhaohui Dong Wenchao Liu Jinwei. Preparation of Semi-solid Slurry of AZ91D Mg Alloy[J]. Special Casting & Nonferrous Alloys, 2004,(5):12-14. DOI：

摘要

采用AZ91D镁合金为试验原料

用自行研制的新型半固态浆料设备及直接流变成形装置为试验设备

研究不同温度、剪切速率下半固态组织的变化规律

并与常规铸造组织相比较。研究表明 :适量提高剪切速率或降低温度

半固态组织的固相颗粒会变得细小、均匀和圆整。同时

对新型装置制备半固态组织的机理进行了研究。

Abstract

We have developed a new semi-solid slurry preparation unit and direct rheoforming equipment to investigate the semi-solid microstructure of AZ91D alloy with varying temperatures and shearing rate compared with the microstructure in conventional casting methods. The results showed that the solid particle became finer

more homogeneous and rounder with the decrease of temperature or the increase of shearing rate. At the same time

the forming mechanism of semi-solid structure prepared by the novel machine was studied.