电渣熔铸TiC增强钢基复合材料组织性能初探

马建国; 黄曼平; 尤显卿; 任昊; 斯庭智

浏览量 : 0 下载量: 166 CSCD: 1

导出
分享
收藏
专辑

电渣熔铸TiC增强钢基复合材料组织性能初探
Microstructure and Properties of Particulate TiC Reinforced Steel Matrix Composites by Electroslag Smelting-casting Method
2005年第1期页码：16-17
纸质出版日期： 2005 ，
DOI：

扫描看全文

[1]马建国,黄曼平,尤显卿,任昊,斯庭智.电渣熔铸TiC增强钢基复合材料组织性能初探[J].特种铸造及有色合金,2005(01):16-17+2.

Ma Jianguo 1 Huang Manping 1 You Xianqing 2 Ren Hao 2 Si Tingzhi 2. Microstructure and Properties of Particulate TiC Reinforced Steel Matrix Composites by Electroslag Smelting-casting Method[J]. Special Casting & Nonferrous Alloys, 2005,(1):16-17.
[1]马建国,黄曼平,尤显卿,任昊,斯庭智.电渣熔铸TiC增强钢基复合材料组织性能初探[J].特种铸造及有色合金,2005(01):16-17+2. DOI：

Ma Jianguo 1 Huang Manping 1 You Xianqing 2 Ren Hao 2 Si Tingzhi 2. Microstructure and Properties of Particulate TiC Reinforced Steel Matrix Composites by Electroslag Smelting-casting Method[J]. Special Casting & Nonferrous Alloys, 2005,(1):16-17. DOI：

摘要

用电渣熔铸的方法制备了 3 %的TiC颗粒增强轴承钢复合材料

对其组织性能进行了初步的探索。试验结果表明

该复合材料的孔隙小、致密度高 ;TiC颗粒较为均匀地分布在基体中

并保留了原始的形态

在晶界处形成了Fe3 C化合物 ;复合材料的耐磨性比基体材料有明显提高。

Abstract

The microstructure and properties of 3% particulate TiC reinforced bearing steel matrix composites prepared by electroslag smelting-casting method were examined. The results show that the composites possess the characteristics of small porosity and high soundness. The un-changed TiC particulate is uniformly distributed into the steel matrix and the Fe 3C compound is formed in the crystal boundary. The wear experiment show that the wear-resistance of the composites are higher than that of the steel matrix.