镁阳极氧化表面改性不同工艺及其成膜效果的比较

张永君; 廖景娱; 段红萍; 严川伟

浏览量 : 0 下载量: 292 CSCD: 2

导出
分享
收藏
专辑

镁阳极氧化表面改性不同工艺及其成膜效果的比较
Comparison of Different Anodizing Processes for Mg Surface Treatment and Their Effects
2004年第3期页码：66-68
纸质出版日期： 2004 ，
DOI：

扫描看全文

[1]张永君,廖景娱,段红萍,严川伟.镁阳极氧化表面改性不同工艺及其成膜效果的比较[J].特种铸造及有色合金,2004(03):66-68+76.

Zhang Yongjun Liao Jingyu. Comparison of Different Anodizing Processes for Mg Surface Treatment and Their Effects[J]. Special Casting & Nonferrous Alloys, 2004,(3):66-68.
[1]张永君,廖景娱,段红萍,严川伟.镁阳极氧化表面改性不同工艺及其成膜效果的比较[J].特种铸造及有色合金,2004(03):66-68+76. DOI：

Zhang Yongjun Liao Jingyu. Comparison of Different Anodizing Processes for Mg Surface Treatment and Their Effects[J]. Special Casting & Nonferrous Alloys, 2004,(3):66-68. DOI：

摘要

阳极氧化是Mg表面处理方法中最有效因而最常用的一种技术。对Mg阳极氧化经典工艺HAE和Dow17以及绿色环保工艺Starter进行全方位比较

发现工艺条件的选择对阳极氧化成膜效果有着十分重要的影响。Mg阳极氧化成膜条件具有多样性

但工艺条件不同

不仅阳极氧化成膜现象不同

而且所得膜层的颜色、均匀性、粗糙度及其耐蚀性、耐磨性和与基体金属之间的结合力等性能指标也不相同。

Abstract

Anodization was one of most effective and most common technology used for all kinds of Mg surface treatment.The classical anodizing processes of Dow17 and HAE for Mg

were compared in all its aspects with the environmentally friendly process

denoted as Starter. The results showed that the choice of anodizing parameters had a very important effect on the courses and results of anodization.The anodic films with different color

uniformity

roughness

corrosion and wear resistance as well as bonding with Mg-matrix etc. were greatly dependant on the varieties of processing parameters.