同步器齿环特种黄铜材料磨损失效的研究

陈洪; 邓雪莲; 周细枝

浏览量 : 0 下载量: 308 CSCD: 4

导出
分享
收藏
专辑

同步器齿环特种黄铜材料磨损失效的研究
Wear-out Failure of Special Brass for Synchronous Ring
2005年第2期页码：123-125
纸质出版日期： 2005 ，
DOI：

扫描看全文

[1]陈洪,邓雪莲,周细枝.同步器齿环特种黄铜材料磨损失效的研究[J].特种铸造及有色合金,2005(02):123-125+64.

Chen Hong Deng Xuelian Zhou Xizhi. Wear-out Failure of Special Brass for Synchronous Ring[J]. Special Casting & Nonferrous Alloys, 2005,(2):123-125.
[1]陈洪,邓雪莲,周细枝.同步器齿环特种黄铜材料磨损失效的研究[J].特种铸造及有色合金,2005(02):123-125+64. DOI：

Chen Hong Deng Xuelian Zhou Xizhi. Wear-out Failure of Special Brass for Synchronous Ring[J]. Special Casting & Nonferrous Alloys, 2005,(2):123-125. DOI：

摘要

同步器齿环在使用中的失效是由磨损造成的。磨损主要有 4种形式

即粘着磨损、疲劳磨损、磨粒磨损及氧化磨损。各种摩擦磨损虽然有其相关的表面形貌

但其磨损过程都存在裂纹的形成和扩展机制。试验结果表明 :同步器齿环磨损形式以粘着磨损为主

可以从控制材料的裂纹形成和扩展来提高耐磨性

Abstract

The failure of used synchronous ring was resulted from the wear.The wear types consists of adhersion wear

fatigue wear

abrasive wear and oxidized wear.Although the different wear mechanism is corresponded to different surface morphology

there exists the formation and propagation of crack in all wear.The results showed that the wear-resistance can be improved by controlling the formation and propagation of the crack due to the wear mainly responsible for the adhersion wear.