减压凝固试样密度法在铝液质量检测中的应用研究

张显飞; 赵忠兴; 金光; 王松涛

浏览量 : 0 下载量: 214 CSCD: 6

导出
分享
收藏
专辑

减压凝固试样密度法在铝液质量检测中的应用研究
Application of Pressure-reduction Solidification Sample Density Method in Detecting the Quality of Liquid Aluminum
2005年第5期页码：265-267
纸质出版日期： 2005 ，
DOI：

扫描看全文

[1]张显飞,赵忠兴,金光,王松涛.减压凝固试样密度法在铝液质量检测中的应用研究[J].特种铸造及有色合金,2005(05):265-267+253.

Zhang Xianfei Zhao Zhongxing Jin Guang Wang Songtao. Application of Pressure-reduction Solidification Sample Density Method in Detecting the Quality of Liquid Aluminum[J]. Special Casting & Nonferrous Alloys, 2005,(5):265-267.
[1]张显飞,赵忠兴,金光,王松涛.减压凝固试样密度法在铝液质量检测中的应用研究[J].特种铸造及有色合金,2005(05):265-267+253. DOI：

Zhang Xianfei Zhao Zhongxing Jin Guang Wang Songtao. Application of Pressure-reduction Solidification Sample Density Method in Detecting the Quality of Liquid Aluminum[J]. Special Casting & Nonferrous Alloys, 2005,(5):265-267. DOI：

摘要

用SGJ Ι型铝液质量检测仪检测铝液质量

探讨了相关工艺参数对减压凝固试样密度值的影响

分析了密度值数据

对照减压凝固试样密度值与常压砂型针孔度等级的对应关系

得到了减压凝固试样密度法的最佳工艺参数

验证了使用该仪器在铝精炼效果检测中的可靠性和稳定性。

Abstract

The effects of some processing parameters on the density of pressure-reduction solidification sample were approached based on detecting the quality of liquid aluminum by SGJ-I type instrument.An optimized processing parameters can be obtained by examining corresponding relation of the density value of the pressure-reduction solidification sample with the grade of pin-hole degree of the sample in sand mold.And the results verified the reliability and stability of the instrument for detecting the refining effects in practice.