English Version
浏览量 : 30 下载量: 46 CSCD: 1
  • 导出

  • 分享

  • 收藏

  • 专辑

    • 加B冷凝管合金HSn70-1B熔铸特点

    • Smelting and Casting Features of HSn70-1B Alloy for Condenser Coil

    • 郭淑梅

      1

      王永朝

      1

      刘月梅

      1
    • 2004年第4期 页码:68-69   

      纸质出版日期: 2004

    扫 描 看 全 文

  • 引用

  • [1]郭淑梅,,,,,,,,,王永朝,,,,,,,,,刘月梅.加B冷凝管合金HSn70-1B熔铸特点[J].特种铸造及有色合金,2004(04):68-69+80. DOI:
    Guo Shumei Wang Yongchao Liu Yuemei. Smelting and Casting Features of HSn70-1B Alloy for Condenser Coil[J]. Special Casting & Nonferrous Alloys, 2004,(4):68-69. DOI:
  •  
  •  
    论文导航

    摘要

    熔体中B的损失主要在加B后的合金化过程 ,其次是铸造时熔体的保温过程 ,在工艺上加强脱氧和覆盖 ,可以比较合理地控制B含量 ;在保温铸造过程中B有向表面迁移聚集的倾向 ;w(B) =0 .0 13 %时 ,对铸态组织有明显细化作用 ,高倍组织发现针状相和块状相 ,B含量较低时 ,未发现针状相 ,块状相经电子探针X射线扫描分析 ,是一种含有合金元素As和其他杂质的富B化合物 ,熔体对硅砂炉衬侵蚀严重。

    Abstract

    B loss in melt mainly occures in B addition followed by alloying process,next at melt holding during smelting and pouring.The B content can be rationally controled with enhancing deoxidation and coverage.B trends towards surface coagulation at melt holding during pouring. w (B) =0.013% can refine greatly as cast microstructure,with occurence of needle like and block like phase in high magification while no needle like phases occur in lower B content.It is founded that the block like phase consits of a rich in B coumpound with As and other inpurities by DEX.Melt strongly erodes silica sand lining.

    关键词

    HSn70-1B; B; 熔体; 组织

    Keywords

    HSn70-1B; B; Melt; Structure

    文章被引用时,请邮件提醒。
    提交

    相关作者

    王丹虹 大连理工大学
    张守魁 大连理工大学
    李尧 湖北工业大学;武汉重型机床厂;江汉大学;湖北工业大学武汉重型机床厂江汉大学
    陈洪 湖北工业大学;武汉重型机床厂;江汉大学;湖北工业大学武汉重型机床厂江汉大学
    毛少鸿 湖北工业大学;武汉重型机床厂;江汉大学;湖北工业大学武汉重型机床厂江汉大学
    夏露 湖北工业大学;武汉重型机床厂;江汉大学;湖北工业大学武汉重型机床厂江汉大学
    郭朋   兰州理工大学  ;  中国南车集团戚墅堰机车车辆工艺研究所  ;  洛阳船舶材料研究所 甘肃省有色金属新材料国家重点实验室  
    朱正锋   兰州理工大学  ;  中国南车集团戚墅堰机车车辆工艺研究所  ;  洛阳船舶材料研究所 甘肃省有色金属新材料国家重点实验室  

    相关机构

    大连理工大学
    湖北工业大学武汉重型机床厂江汉大学
    江汉大学
    武汉重型机床厂
    湖北工业大学
    0