滑动轴承用复杂铝黄铜耐磨性能研究

周世杰; 唐生渝

浏览量 : 0 下载量: 188 CSCD: 8

导出
分享
收藏
专辑

滑动轴承用复杂铝黄铜耐磨性能研究
Wear Resistance of Aluminum-brass for Bearing
2005年第11期
纸质出版日期： 2005 ，
DOI：

扫描看全文

[1]周世杰,唐生渝.滑动轴承用复杂铝黄铜耐磨性能研究[J].特种铸造及有色合金,2005(11):66-68+7.

Zhou Shijie 1, 2 Tang Shengyu 2. Wear Resistance of Aluminum-brass for Bearing[J]. Special Casting & Nonferrous Alloys, 2005,(11).
[1]周世杰,唐生渝.滑动轴承用复杂铝黄铜耐磨性能研究[J].特种铸造及有色合金,2005(11):66-68+7. DOI：

Zhou Shijie 1, 2 Tang Shengyu 2. Wear Resistance of Aluminum-brass for Bearing[J]. Special Casting & Nonferrous Alloys, 2005,(11). DOI：

摘要

以自行开发的LTHAl656431黄铜和日本的JISCAC304C黄铜为研究对象

测定了合金在不同时间和不同载荷下的磨损量

计算摩擦因数

并对两种材料进行了显微组织分析。结果表明

LTHAl656431黄铜的耐磨性优于JISCAC304C黄铜

在重载下耐磨性更好。显微分析表明

LTHAl656431黄铜的显微组织为变形组织

并有均匀细小的强化质点分布在基体组织中;JISCAC304C黄铜的显微组织为不完全加工组织

强化质点尺寸和分布均不均匀。前者的组织致密度高

显微组织决定了黄铜的耐磨性能。

Abstract

The weight loss and friction coefficient of self-developed LTHAl65-6-4-3-1 brass and JISCAC304C brass from Japan as well as their microstructure were investigated with different time and load. The results show that the wear resistance of LTHAl65-6-4-3-1 brass is superior to that of JISCAC304C. Microstructure observation indicates that LTHAl65-6-4-3-1 brass has a deformed microstructure

in which fine enhancing particle is uniformly distributed in the matrix

while JISCAC304C brass has uncompletely worked microstructure and uneven grain size and distribution of enhancing particle

meanwhile

the microstructual soundness of LTHAl65-6-4-3-1 brass is higher than that of JISCAC304C brass. The wear resistance is dependant on the microstructure of the alloy.