铝合金缸盖罩的压铸工艺与质量控制

严卓荣; 容景斌; 陈杰

浏览量 : 0 下载量: 203 CSCD: 3

导出
分享
收藏
专辑

铝合金缸盖罩的压铸工艺与质量控制
Quality Control for Aluminum Cover of Engine for Car in Die Casting
2005年第7期页码：419-420
纸质出版日期： 2005 ，
DOI：

扫描看全文

[1]严卓荣,容景斌,陈杰.铝合金缸盖罩的压铸工艺与质量控制[J].特种铸造及有色合金,2005(07):419-420+383.

Yan Zhuorong Rong Jingbin Chen Jie. Quality Control for Aluminum Cover of Engine for Car in Die Casting[J]. Special Casting & Nonferrous Alloys, 2005,(7):419-420.
[1]严卓荣,容景斌,陈杰.铝合金缸盖罩的压铸工艺与质量控制[J].特种铸造及有色合金,2005(07):419-420+383. DOI：

Yan Zhuorong Rong Jingbin Chen Jie. Quality Control for Aluminum Cover of Engine for Car in Die Casting[J]. Special Casting & Nonferrous Alloys, 2005,(7):419-420. DOI：

摘要

对轿车发动机铝合金缸盖罩几个主要压铸工艺参数进行了介绍:慢压射速度为0.2～0.3m/s

快压射速度为6.0～6.3m/s

快压射行程为460mm

增压比压为33.6MPa

增压距离为510mm

保压时间为8s

浇注温度为680±10℃

模具温度为140～260℃

生产出铝缸盖罩达到了技术要求

还介绍了确保缸盖罩质量的技术改进措施。

Abstract

Aluminum cover of engine for Honda car was manufactured by die casting.The predominant factors influencing the cover quality include advanced mould design

proper injection parameters

special moldfication for aluminum melt

rational improvement of ingate and exhaust pipe and proper control of die temperature.Some predominant parameters were determined including slow-injection velocity of 0.2～0.3 m/s

fast-injection velocity of 6.0～6.3 m/s

fast-injection distance of 460 mm and applying-pressure specific pressure of 33.6 MPa

applying-pressure distance of 510 mm

holding pressure of 8 s

pouring temperature of 680 ℃ as well as die temperature of 140～260 ℃.