Al<sub>2</sub>O<sub>3</sub>微粉表面处理及其在耐磨涂料中的应用研究

闫军; 易建政; 崔海萍; 卢海星; 赵忠民; 刘晶芝

浏览量 : 0 下载量: 271 CSCD: 1

导出
分享
收藏
专辑

Al₂O₃微粉表面处理及其在耐磨涂料中的应用研究
Surface Treatment for Al₂O₃ Powder and Its Application in Wear Resistant Coatings for Military Equipment
2005年第5期页码：268-269
纸质出版日期： 2005 ，
DOI：

扫描看全文

[1]闫军,易建政,崔海萍,卢海星,赵忠民,刘晶芝.Al_2O_3微粉表面处理及其在耐磨涂料中的应用研究[J].特种铸造及有色合金,2005(05):268-269+253.

Yan Jun 1 Yi Jianzheng 1 Cui Haiping 1 Lu Xinghai 1 Zhao Zhongmin 1 Liu Jingzhi 2. Surface Treatment for Al₂O₃ Powder and Its Application in Wear Resistant Coatings for Military Equipment[J]. Special Casting & Nonferrous Alloys, 2005,(5):268-269.
[1]闫军,易建政,崔海萍,卢海星,赵忠民,刘晶芝.Al_2O_3微粉表面处理及其在耐磨涂料中的应用研究[J].特种铸造及有色合金,2005(05):268-269+253. DOI：

Yan Jun 1 Yi Jianzheng 1 Cui Haiping 1 Lu Xinghai 1 Zhao Zhongmin 1 Liu Jingzhi 2. Surface Treatment for Al₂O₃ Powder and Its Application in Wear Resistant Coatings for Military Equipment[J]. Special Casting & Nonferrous Alloys, 2005,(5):268-269. DOI：

摘要

研制了一种以Al2 O3为填料的耐磨涂料

利用耐磨涂料来修复铝合金部件表面的阳极氧化膜

给出了以Al2 O3为填料的配方及主要性能指标

重点研究了利用共沸蒸馏法处理Al2 O3微细粉体表面对涂料耐磨性的影响

并分析其成因

利用IR分析了处理前后粉体表面基团的变化

并用SEM观察粉体在树脂中的分散状态。涂层性能测试结果表明

加入经过表面处理的Al2 O3后

其耐磨性、附着力明显提高

摩擦质量损失降低了43%。

Abstract

A kind of wear resistant coatings consisting of Al

and epoxy resin has been developed

which can be applied to renew the worn surface of anodic oxidation film pf duralumin alloy in military equipments.The effects of the surface treatment of Al

powder by the heterogeneous isotropic distillation process on the wear resistance of the coating were analyzed.The IR spectra of the powder showed that the distillation effectively dehydrates hydrous Al

powder

and succeeds in substituting the hydrate water with butane molecular.The SEM photos demonstrated that the Al

powder is well dispersed in resin.The coating testing results showed that the wear resistance and adhesion can be obviously improved and the wear weight loss is decreased by 43% with the addition of treated Al

powder.