黄原胶对消失模铸造涂料性能的影响

张忠明; 徐春杰

浏览量 : 0 下载量: 244 CSCD: 3

导出
分享
收藏
专辑

黄原胶对消失模铸造涂料性能的影响
Effects of Xanthan Gum on the Performance of Water Base Coating for Lost Foam Casting
2005年第8期页码：488-489
纸质出版日期： 2005 ，
DOI：

扫描看全文

[1]张忠明,徐春杰.黄原胶对消失模铸造涂料性能的影响[J].特种铸造及有色合金,2005(08):488-489+447.

Zhang Zhongming Xu Chunjie. Effects of Xanthan Gum on the Performance of Water Base Coating for Lost Foam Casting[J]. Special Casting & Nonferrous Alloys, 2005,(8):488-489.
[1]张忠明,徐春杰.黄原胶对消失模铸造涂料性能的影响[J].特种铸造及有色合金,2005(08):488-489+447. DOI：

Zhang Zhongming Xu Chunjie. Effects of Xanthan Gum on the Performance of Water Base Coating for Lost Foam Casting[J]. Special Casting & Nonferrous Alloys, 2005,(8):488-489. DOI：

摘要

为提高消失模铸造水基涂料的质量

探讨了黄原胶作为微量添加剂对涂料性能的影响。试验研究表明

铸造涂料中加入适量的黄原胶可提高悬浮性、显著增大涂料粘度和涂挂性、改善涂料的流变行为。黄原胶还可显著提高涂层的强度

但使涂层透气性略有降低。鉴于黄原胶的优异性能

可望在消失模铸造水基涂料中获得应用。

Abstract

In order to improve the performance of water base coating for lost foam casting

the effects of xanthan gum on the performance of the coating were investigated.Experimental results showed that proper xanthan gum addition can significantly increase suspension capacity and coating layer strength

and improve coating adhesion and brushibility as well as viscosity while decreases slightly the coating permeability.It was believed that the xanthan gum can be widely used in water base coating.