压室液态金属流动耦合温度场三维数值模拟

袁烺; 熊守美; 柳百成

浏览量 : 0 下载量: 246 CSCD: 8

导出
分享
收藏
专辑

压室液态金属流动耦合温度场三维数值模拟
3D Numerical Simulation of Temperature Field Coupled with Flow Field of the Liquid Metal in Shot Sleeve of Die Casting Process
2005年第10期
纸质出版日期： 2005 ，
DOI：

扫描看全文

[1]袁烺,熊守美,柳百成.压室液态金属流动耦合温度场三维数值模拟[J].特种铸造及有色合金,2005(10):21-23+4-5.

Yuan Lang Xiong Shoumei Liu Baicheng. 3D Numerical Simulation of Temperature Field Coupled with Flow Field of the Liquid Metal in Shot Sleeve of Die Casting Process[J]. Special Casting & Nonferrous Alloys, 2005,(10).
[1]袁烺,熊守美,柳百成.压室液态金属流动耦合温度场三维数值模拟[J].特种铸造及有色合金,2005(10):21-23+4-5. DOI：

Yuan Lang Xiong Shoumei Liu Baicheng. 3D Numerical Simulation of Temperature Field Coupled with Flow Field of the Liquid Metal in Shot Sleeve of Die Casting Process[J]. Special Casting & Nonferrous Alloys, 2005,(10). DOI：

摘要

压铸过程中

压室内液态金属卷入的气体是影响铸件质量的原因之一。针对压室压射过程

引入冲头的移动规律以及流动过程中热量传递的计算

实现并开发了压室压射过程的流场耦合温度场的数值模拟程序。采用所开发的模拟程序对压室金属流动及传热过程进行了模拟

模拟结果与FLOW-3D的计算结果以及临界速度理论作比较

两者均吻合。采用压室模拟能够优化冲头的运动规律

使卷气最小。

Abstract

The air entrapment caused by the liquid metal flow in the shot sleeve is one of the factors influencing the quality of the die castings.Aiming at the shot sleeve injection process

the model of flow field coupled with temperature field in the liquid metal flow in the shot sleeve was developed

in which the profile of the plunger movement and the heat transfer in the liquid metal flow were considered.The numerical simulation for liquid metal flow in the shot sleeve and heat transfer was performed by the developed model.The simulated results is well in agreement with the Flow-3D simulated ones and critical velocity.Optimizing the movement profile of the plunger can minimize the air entrapment in the shot sleeve.