EA111油底壳压铸模设计

葛春东; 王淑清

浏览量 : 0 下载量: 153 CSCD: 8

导出
分享
收藏
专辑

EA111油底壳压铸模设计
Design of Die Casting Die for EA111 Oil Tank
2006年第5期页码：293-294
纸质出版日期： 2006 ，
DOI：

扫描看全文

[1]葛春东,王淑清.EA111油底壳压铸模设计[J].特种铸造及有色合金,2006(05):293-294+255.

Ge Chundong, Wang Shuqing. Design of Die Casting Die for EA111 Oil Tank[J]. Special Casting & Nonferrous Alloys, 2006,(5):293-294.
[1]葛春东,王淑清.EA111油底壳压铸模设计[J].特种铸造及有色合金,2006(05):293-294+255. DOI：

Ge Chundong, Wang Shuqing. Design of Die Casting Die for EA111 Oil Tank[J]. Special Casting & Nonferrous Alloys, 2006,(5):293-294. DOI：

摘要

针对EA111油底壳铝合金压铸件的结构特点及工艺要求

介绍了一种切实可行的压铸模设计方案。该压铸模选择大端面为动静模分型面

设置内抽芯机构

采用加热油、加热器控制模具温度

滑块采用滑套导滑等结构

并配备抽真空系统

解决了气孔问题

提高了压铸件品质。

Abstract

Aiming at the structure features and technological requirements for EA111 aluminum alloy oil tank

an available design plan for die casting die was described. The large end-face was selected as parting face and inner-drawing-core mechanism was used for the die casting die. Meanwhile

heating oil and heating machine were used to control the temperature of the die

and slide-slot was used to guide slide block. Vacuum-drawing system was assembled to eliminate the gas hole

which improved the quality of the parts.