7A04高强铝合金复合强韧化工艺

彭北山; 宁爱林

浏览量 : 0 下载量: 271 CSCD: 2

导出
分享
收藏
专辑

7A04高强铝合金复合强韧化工艺
Compound Strengthening for High Strength 7A04 Aluminum Alloy
2006年第4期页码：248-249
纸质出版日期： 2006 ，
DOI：

扫描看全文

[1]彭北山,宁爱林.7A04高强铝合金复合强韧化工艺[J].特种铸造及有色合金,2006(04):248-249+192.

Peng Beishan, Ning Ailin. Compound Strengthening for High Strength 7A04 Aluminum Alloy[J]. Special Casting & Nonferrous Alloys, 2006,(4):248-249.
[1]彭北山,宁爱林.7A04高强铝合金复合强韧化工艺[J].特种铸造及有色合金,2006(04):248-249+192. DOI：

Peng Beishan, Ning Ailin. Compound Strengthening for High Strength 7A04 Aluminum Alloy[J]. Special Casting & Nonferrous Alloys, 2006,(4):248-249. DOI：

摘要

采用复合强韧化工艺

对7A04铝合金的组织和性能进行了研究。结果表明

通过熔体净化、晶粒细化、强化均匀化、锻造及分级固溶处理能明显改善和提高7A04高强铝合金的综合性能

而且可以大大减少均匀化处理的保温时间。

Abstract

The microstructure and mechanical properties of high strength 7A04 aluminum alloy were investigated by a compound strengthening method.The results show that not only comprehensive properties of the alloy are obviously improved by melts purification

grain refinement

strengthening homogenization

forging and progressive solid solution

but also holding time is greatly decreased.