铜合金常见形状厚壁铸件的铸造工艺研究

杨为勤; 谢国峰

浏览量 : 0 下载量: 238 CSCD: 4

导出
分享
收藏
专辑

铜合金常见形状厚壁铸件的铸造工艺研究
Casting Technologies for Conventional Shape Thick-walled Cu Alloy Components
2006年第4期页码：242-244
纸质出版日期： 2006 ，
DOI：

扫描看全文

[1]杨为勤,谢国峰.铜合金常见形状厚壁铸件的铸造工艺研究[J].特种铸造及有色合金,2006(04):242-244+192.

Yang Weiqin, Xie Guofeng. Casting Technologies for Conventional Shape Thick-walled Cu Alloy Components[J]. Special Casting & Nonferrous Alloys, 2006,(4):242-244.
[1]杨为勤,谢国峰.铜合金常见形状厚壁铸件的铸造工艺研究[J].特种铸造及有色合金,2006(04):242-244+192. DOI：

Yang Weiqin, Xie Guofeng. Casting Technologies for Conventional Shape Thick-walled Cu Alloy Components[J]. Special Casting & Nonferrous Alloys, 2006,(4):242-244. DOI：

摘要

铜合金厚壁铸件根据其形状可分为常见形状厚壁铸件和异常形状厚壁铸件

前者与后者相比

铸造工艺规律性较强。根据多年的生产实践经验

借助计算机凝固模拟分析技术

对典型的常见形状厚壁铸件按轴套类、轴瓦类、斗帽类、滑块类、轮系类、阀体类、窄板类进行分类

并给出了较为成熟的铸造工艺模式。通过对常见形状厚壁铸件规律性的分析

在保证产品质量的前提下

找出既能使产品得到充分补缩

又能使冒口易于切割;既能使工装、操作工序简洁

又能获得较高的工艺出品率的方法。

Abstract

Thick-walled copper alloy castings can be ranked as conventional shape casting and abnormal shape casting from shape.Compared with the abnormal shape castings

the conventional shape castings possess high casting processing regulation.The casting technologies for typical conventional shape thick-walled castings were introduced

including axle sleeve

bearing bush

hopper

slider

wheel

valve and narrow plate

from practical experiences based on CAE.The proposed casting method can not only be fully feed but also be free cut for riser as well as taking simple assemble and operation and obtaining higher production volume rate through the analysis of regulation in the castings in the condition of ensuring casting product.