Ni对Be-Al合金组织和性能的影响

王战宏; 王莉; 赵双群; 买学锋; 许德美; 钟景明; 曲选辉

浏览量 : 0 下载量: 128 CSCD: 5

导出
分享
收藏
专辑

Ni对Be-Al合金组织和性能的影响
Effects of Ni on Microstructure and Mechanical Properties of Beryllium-aluminum Alloys
2006年第8期页码：526-528
纸质出版日期： 2006 ，
DOI：

扫描看全文

[1]王战宏,王莉,赵双群,买学锋,许德美,钟景明,曲选辉.Ni对Be-Al合金组织和性能的影响[J].特种铸造及有色合金,2006(08):526-528+463-464.

Wang Zhanhong~ 1, 2, Wang Li~2, et al. Effects of Ni on Microstructure and Mechanical Properties of Beryllium-aluminum Alloys[J]. Special Casting & Nonferrous Alloys, 2006,(8):526-528.
[1]王战宏,王莉,赵双群,买学锋,许德美,钟景明,曲选辉.Ni对Be-Al合金组织和性能的影响[J].特种铸造及有色合金,2006(08):526-528+463-464. DOI：

Wang Zhanhong~ 1, 2, Wang Li~2, et al. Effects of Ni on Microstructure and Mechanical Properties of Beryllium-aluminum Alloys[J]. Special Casting & Nonferrous Alloys, 2006,(8):526-528. DOI：

摘要

通过室温拉伸试验与金相显微镜和扫描电镜观察分析

研究了不同Ni含量的铸态Be-Al合金的显微组织和力学性能。结果表明

铸态Be-Al合金的组织由Be相镶嵌在Al相基体中组成

Ni主要分布在Be相中起强化作用。Ni含量对Be-Al合金的室温抗拉强度、屈服强度和洛氏硬度有较大影响

Ni含量在4%时合金的性能最佳。合金室温下的断裂是由Al相的延性断裂和Be相的解理断裂构成的混合型断裂。

Abstract

Microstructure and mechanical properties of as-cast Be-Al alloy with different Ni content have been investigated by tensile testing

OM and TEM. The results reveal that the microstructure of as-cast Be-Al alloy consists of Be phase embedded into Al phase matrix

where Ni is distributed into Be phase to strengthen the matrix alloy. Ni content has greatly affected the ambient tensile strength

yield strength and hardness. The optimized comprehensive mechanical properties can be obtained by adding 4% Ni. The fracture morphology is composed of ductile rupture of Al phase and quasi-cleavage rupture of Be phase.