方坯连铸非稳态充型过程流场温度场耦合数值模拟

崔小朝; 李朗; 晋艳娟; 陈艳霞

浏览量 : 0 下载量: 210 CSCD: 2

导出
分享
收藏
专辑

方坯连铸非稳态充型过程流场温度场耦合数值模拟
Numerical Simulation of Coupling Flow Field with Temperature Field in Un-steady Filling Process of Billet Continuous Casting
2006年第10期页码：634-636
纸质出版日期： 2006 ，
DOI：

扫描看全文

[1]崔小朝,李朗,晋艳娟,陈艳霞.方坯连铸非稳态充型过程流场温度场耦合数值模拟[J].特种铸造及有色合金,2006(10):634-636+605.

Cui Xiaochao, Li Lang, Jin Yanjuan, et al. Numerical Simulation of Coupling Flow Field with Temperature Field in Un-steady Filling Process of Billet Continuous Casting[J]. Special Casting & Nonferrous Alloys, 2006,(10):634-636.
[1]崔小朝,李朗,晋艳娟,陈艳霞.方坯连铸非稳态充型过程流场温度场耦合数值模拟[J].特种铸造及有色合金,2006(10):634-636+605. DOI：

Cui Xiaochao, Li Lang, Jin Yanjuan, et al. Numerical Simulation of Coupling Flow Field with Temperature Field in Un-steady Filling Process of Billet Continuous Casting[J]. Special Casting & Nonferrous Alloys, 2006,(10):634-636. DOI：

摘要

采用CFD商用软件Flow-3d

对C的质量分数为0.2%的碳钢165mm×165mm方坯连铸非稳态充型过程中结晶器内钢水在流场、温度场耦合作用下的凝固和流动状况进行数值模拟。结果表明

内置冷却器在连铸充型过程中可以明显地提高传热效率

降低钢液冲击深度。内冷却器对钢液的流动影响很大

可以减缓钢液的流动速度

减少冲击深度

并能使钢液的流动更加均匀

提高铸坯质量。

Abstract

Numerical simulation of flow and solidification process of liquid steel in crystallizer in un-steady filling process has been conducted based on flow field coupled with temperature field using CFD commercial software Flow-3D in 0.2% carbon steel billet with 165 mm×165 mm continuous casting.The simulated results indicate that inside-cooling apparatus in mould can effectively promote heat transfer efficiency and decrease impaction depth of liquid steel.Inside-cooling apparatus can improve the billet quality due to relief the flow velocity and more homogeneous flow of liquid steel.