ZF16高压开关触头座的热挤压工艺开发

苏娟华; 郜建新; 周伯楚

压力铸造 | 浏览量 : 0 下载量: 97 CSCD: 1

导出
分享
收藏
专辑

ZF16高压开关触头座的热挤压工艺开发
Production of ZF16 Contact Pedestal Used in High Voltage Switch by Hot Extrusion
2007年第4期页码：274-276
纸质出版日期： 2007 ，
DOI：

扫描看全文

[1]苏娟华,郜建新,周伯楚.ZF16高压开关触头座的热挤压工艺开发[J].特种铸造及有色合金,2007(04):274-276+242-243.

Su Juanhua, Gao Jianxin, Zhou Bochu. Production of ZF16 Contact Pedestal Used in High Voltage Switch by Hot Extrusion[J]. Special Casting & Nonferrous Alloys, 2007,(4):274-276.
[1]苏娟华,郜建新,周伯楚.ZF16高压开关触头座的热挤压工艺开发[J].特种铸造及有色合金,2007(04):274-276+242-243. DOI：

Su Juanhua, Gao Jianxin, Zhou Bochu. Production of ZF16 Contact Pedestal Used in High Voltage Switch by Hot Extrusion[J]. Special Casting & Nonferrous Alloys, 2007,(4):274-276. DOI：

摘要

研究了ZF16触头座的热挤压成形工艺

确定新的工艺流程为:下料-加热-反挤压-冲底-加热-正挤压。与常规机加工相比较

采用两次热挤压工艺生产触头座具有材料消耗少、生产效率高、经济效益显著等优点。

Abstract

The ZF16 contact pedestal used in high voltage switch by hot extrusion was experimentally manufactured. The new processing procedure in hot extrusion is chosen as follows: materials cutting---heating---converse extrusion---punching---heating---extrusion. Compared with conventional machining process

the technology of first forward-extrusion and second extrusion has the advantages of low material-consumption

high efficiency and significant economic profits in production of ZF16 contact pedestal used in high voltage switch.