铸钢件表面铸渗硅复合层的研究

刘炳

专利文献信息 | 浏览量 : 0 下载量: 165 CSCD: 1

导出
分享
收藏
专辑

铸钢件表面铸渗硅复合层的研究
Si-Fe Compound Surface on Cast Steel by Casting-infiltration
2007年第1期页码：14-15
纸质出版日期： 2007 ，
DOI：

扫描看全文

[1]刘炳.铸钢件表面铸渗硅复合层的研究[J].特种铸造及有色合金,2007(01):14-15+8.

Liu Bing. Si-Fe Compound Surface on Cast Steel by Casting-infiltration[J]. Special Casting & Nonferrous Alloys, 2007,(1):14-15.
[1]刘炳.铸钢件表面铸渗硅复合层的研究[J].特种铸造及有色合金,2007(01):14-15+8. DOI：

Liu Bing. Si-Fe Compound Surface on Cast Steel by Casting-infiltration[J]. Special Casting & Nonferrous Alloys, 2007,(1):14-15. DOI：

摘要

研究了不同铸渗工艺对铸钢件表面铸渗硅复合层厚度和质量的影响。采用扫描电子显微镜（SEM）、X射线能谱（EDS）及显微硬度仪等分析手段

阐述了该铸钢件表面铸渗硅复合层的微观成分、组织及性能特点。结果表明

钢水的浇注温度为1560℃左右时

铸钢件表面可以得到厚度为0·5

·3mm且表面质量较好的复合层。另外渗硅层与母材铸钢的界面为结合牢固的锯齿型冶金结合状态。

Abstract

Effects of different casting-infiltration ways on thickness and quality of Si-Fe compound layer on cast steel part surface have been conducted.Microstructure

constituent and properties of Si-Fe compound layer were determined by SEM（scanning electromicroscope）

EDS and micro-hardness tester.Desirable cast-infiltrated Si-Fe compound surface with 0.5

.3 mm in thickness can be obtained on the cast steel parts surface with pouring temperature at about 1 560 ℃ for liquid steel.In addition

the bonding mechanism of cast-infiltrated Si-Fe compound layer with matrix exhibits sawtooth-like metallurgical bonding.

关键词

铸渗工艺铸渗硅复合层界面结合状态

Keywords

Cast-infiltrationCast-infiltrated Si-Fe Compound LayerInterfacial Bonding

references

文章被引用时，请邮件提醒。

提交

暂无数据