气泵压缩机缸盖模具设计及其消失模铸造

徐先宜; 叶升平; 吴志超; 李斌

消失模铸造 | 浏览量 : 0 下载量: 129 CSCD: 0

导出
分享
收藏
专辑

气泵压缩机缸盖模具设计及其消失模铸造
Design of Mould for Compressor Cylinder Cover of Gas-pump in Lost Foam Casting
2007年第4期页码：289-291
纸质出版日期： 2007 ，
DOI：

扫描看全文

[1]徐先宜,叶升平,吴志超,李斌.气泵压缩机缸盖模具设计及其消失模铸造[J].特种铸造及有色合金,2007(04):289-291+244.

Xu Xianyi1, Ye Shengping1, Wu Zhichao1, et al. Design of Mould for Compressor Cylinder Cover of Gas-pump in Lost Foam Casting[J]. Special Casting & Nonferrous Alloys, 2007,(4):289-291.
[1]徐先宜,叶升平,吴志超,李斌.气泵压缩机缸盖模具设计及其消失模铸造[J].特种铸造及有色合金,2007(04):289-291+244. DOI：

Xu Xianyi1, Ye Shengping1, Wu Zhichao1, et al. Design of Mould for Compressor Cylinder Cover of Gas-pump in Lost Foam Casting[J]. Special Casting & Nonferrous Alloys, 2007,(4):289-291. DOI：

摘要

介绍了气泵压缩机缸盖的三维造型、泡塑模具设计

消失模铸造试验及工艺改进过程。试验表明

根据缸盖泡沫模样分片方案设计出4副成型模具

能制造出密度较低、表面光洁、尺寸稳定的缸盖泡沫模片;采用三个内浇道组成的顶注工艺能够有效地避免狭小空腔处的高温烧结现象。

Abstract

Three-dimensional molding

mould design

production of white-pattern

adhesion of pattern layer

brushing coating and pouring of T-5011 396 cylinder cover of the Bendix Tu-Flu 500&750 compressor have been expounded. The developing period of the mould can be shortened and the modified ability can be improved by visualizing the product structure and mould design using computer simulation. The cavity in the pattern can be effectively filled with the small bead with good fluidity. The deformation and location-fixed of cylinder cover can be greatly eliminated by means of lost foam casting.