Fe相及其形貌对共晶Al-Si合金性能的影响

吴晓波; 张恒华; 李敏敏; 邵光杰; 杨弋涛; 许珞萍

English Version

专利文献信息 | 浏览量 : 14 下载量: 413 CSCD: 5

导出
分享给微信好友或者朋友圈

分享
收藏
专辑

Fe相及其形貌对共晶Al-Si合金性能的影响
Effects of Content and Morphology of Iron Phase on the Microstructure and Mechanical Properties of Eutectic Al-Si Alloy
- 角色： First author 第一作者
- 机构：
  上海大学材料科学与工程学院
吴晓波
1 ，
- 机构：
  上海大学材料科学与工程学院
张恒华
1 ，
- 机构：
  上海大学材料科学与工程学院
李敏敏
1 ，
- 机构：
  上海大学材料科学与工程学院
邵光杰
1 ，
- 机构：
  上海大学材料科学与工程学院
杨弋涛
1 ，
- 机构：
  上海大学材料科学与工程学院
许珞萍
1
2007年第1期页码：64-67
纸质出版日期： 2007 ，
DOI：

扫描看全文

引用
[1]吴晓波,张恒华,李敏敏,邵光杰,杨弋涛,许珞萍.Fe相及其形貌对共晶Al-Si合金性能的影响[J].特种铸造及有色合金,2007(01):64-67+11.

Wu Xiaobo, Zhang Henghua, Li Minmin, et al. Effects of Content and Morphology of Iron Phase on the Microstructure and Mechanical Properties of Eutectic Al-Si Alloy[J]. Special Casting & Nonferrous Alloys, 2007,(1):64-67.
[1]吴晓波,张恒华,李敏敏,邵光杰,杨弋涛,许珞萍.Fe相及其形貌对共晶Al-Si合金性能的影响[J].特种铸造及有色合金,2007(01):64-67+11. DOI：

Wu Xiaobo, Zhang Henghua, Li Minmin, et al. Effects of Content and Morphology of Iron Phase on the Microstructure and Mechanical Properties of Eutectic Al-Si Alloy[J]. Special Casting & Nonferrous Alloys, 2007,(1):64-67. DOI：

摘要

应用光学显微镜、万能拉伸实验机及XRD等,研究了不同Fe含量及其Fe相形貌对共晶Al-Si合金（ADC12）组织性能的影响,并利用扫描电镜（SEM）及能谱分析了Fe相的含量、形貌及铸件中Fe等元素的面分布。试验发现,随着Fe含量的上升,铸件的抗拉强度及伸长率逐渐下降;当Fe的质量分数在1·0%左右时,其抗拉强度急剧下降,伸长率也下降很多。在Fe含量高的Al-Si合金中按一定的w（Mn）/w（Fe）比加入Mn,使铁相形貌由针状向块状和“田”字状转变,铸件的抗拉强度提高180%。

译

Abstract

Effects of content and morphology of iron phase in eutectic Al-Si alloy have been investigated by optical microscope（OM）,universal material testing machine and XRD（X-ray diffusion）.The composition and microstructure of iron phase and the distribution of iron element in the alloy have been observed by SEM and energy spectrum analysis.The experimental results reveal that with the increase of Fe content,the tensile strength and elongation of the alloy are decreased gradually,in which the tensile strength and elongation are sharply descended with about 1% Fe content.The tensile strength of the alloy containing high Fe content can be improved by 180% with adding Mn to a given Fe/Mn ratio,which is contributed to the transformation of needle-like Fe phase from bulky and Chinese script Fe phase.

译

关键词

Al-Si合金; Fe相; 组织性能

译

Keywords

Eutectic Al-Si Alloy; Iron Phase; Microstructure and Mechanical Properties

译

摘要

应用光学显微镜、万能拉伸实验机及XRD等

研究了不同Fe含量及其Fe相形貌对共晶Al-Si合金（ADC12）组织性能的影响

并利用扫描电镜（SEM）及能谱分析了Fe相的含量、形貌及铸件中Fe等元素的面分布。试验发现

随着Fe含量的上升

铸件的抗拉强度及伸长率逐渐下降;当Fe的质量分数在1·0%左右时

其抗拉强度急剧下降

伸长率也下降很多。在Fe含量高的Al-Si合金中按一定的w（Mn）/w（Fe）比加入Mn

使铁相形貌由针状向块状和“田”字状转变

铸件的抗拉强度提高180%。

Abstract

Effects of content and morphology of iron phase in eutectic Al-Si alloy have been investigated by optical microscope（OM）

universal material testing machine and XRD（X-ray diffusion）.The composition and microstructure of iron phase and the distribution of iron element in the alloy have been observed by SEM and energy spectrum analysis.The experimental results reveal that with the increase of Fe content

the tensile strength and elongation of the alloy are decreased gradually

in which the tensile strength and elongation are sharply descended with about 1% Fe content.The tensile strength of the alloy containing high Fe content can be improved by 180% with adding Mn to a given Fe/Mn ratio

which is contributed to the transformation of needle-like Fe phase from bulky and Chinese script Fe phase.

关键词

Al-Si合金Fe相组织性能

Keywords

Eutectic Al-Si AlloyIron PhaseMicrostructure and Mechanical Properties

references

文章被引用时，请邮件提醒。

提交

Sr对高铁Al-Si合金组织和性能的影响