English Version
计算机应用技术 | 浏览量 : 23 下载量: 81 CSCD: 1
  • 导出

  • 分享

  • 收藏

  • 专辑

    • 压室内金属液流动形态的二维数值模拟

    • 2D Numerical Simulation of Flow Field of Liquid Metal in Shot Sleeve

    • 袁有录

      1
    • 2007年第6期 页码:436-438   

      纸质出版日期: 2007

    扫 描 看 全 文

  • 引用

  • [1]袁有录.压室内金属液流动形态的二维数值模拟[J].特种铸造及有色合金,2007(06):436-438+406-407. DOI:
    Yuan Youlu. 2D Numerical Simulation of Flow Field of Liquid Metal in Shot Sleeve[J]. Special Casting & Nonferrous Alloys, 2007,(6):436-438. DOI:
  •  
  •  
    论文导航

    摘要

    在普通压铸流场模拟的基础上,通过建立冲头、压室及金属液之间的运动学与动力学控制方程,以及三者之间的边界条件与初始条件,模拟了压室内金属液在冲头推动下的二维流动形态。分析了冲头的不同运动参数对压室内金属液卷气的影响,为实际压铸中慢压射速度的选择提供了参考。

    Abstract

    Control equations of kinetics and dynamics among the plunger,shot sleeve and liquid metal have been established to simulate the 2D flow field of liquid metal in shot sleeve based on conventional flow field simulation,in which the boundary and initial conditions among the threes are considered.The effects of different velocities of plunger on the entrapped-gas defects in liquid metal in shot sleeve have been approached,which provides a reference for the selection of slow-injection velocity in practical die casting.

    关键词

    压室; 流动形态; 数值模拟

    Keywords

    Shot Sleeve; Flow Field; Numerical Simulation

    文章被引用时,请邮件提醒。
    提交

    相关作者

    袁烺 清华大学
    熊守美 清华大学
    柳百成 清华大学
    张健健 西部金属材料股份有限公司
    王振虎 西部金属材料股份有限公司
    于梦娜 西部金属材料股份有限公司
    毛旭海 南京工业大学机械与动力工程学院
    苏小平 南京工业大学机械与动力工程学院

    相关机构

    清华大学
    西部金属材料股份有限公司
    南京工业大学机械与动力工程学院
    华中科技大学材料科学与工程学院,材料成形与模具技术全国重点实验室
    中国航发北京航空材料研究院
    0