硬铝合金软接触电磁连铸矩形结晶器透磁性能模拟

李军; 王同敏; 蔡少武; 许菁菁; 王家淳; 曹志强; 李廷举

计算机应用技术 | 浏览量 : 0 下载量: 102 CSCD: 4

导出
分享
收藏
专辑

硬铝合金软接触电磁连铸矩形结晶器透磁性能模拟
Numerical Simulation on Magnetic Penetrating Performance of Soft-Contact Electromagnetic Casting Rectangular Mould for Duraluminium Alloys
2008年第S1期页码：523-526
纸质出版日期： 2008 ，
DOI：

扫描看全文

[1]李军,王同敏,蔡少武,许菁菁,王家淳,曹志强,李廷举.硬铝合金软接触电磁连铸矩形结晶器透磁性能模拟[J].特种铸造及有色合金,2008(S1):523-526.

LI Jun1, WANG Tong-min1, CAI Shao-wu1, et al. Numerical Simulation on Magnetic Penetrating Performance of Soft-Contact Electromagnetic Casting Rectangular Mould for Duraluminium Alloys[J]. Special Casting & Nonferrous Alloys, 2008,(S1):523-526.
[1]李军,王同敏,蔡少武,许菁菁,王家淳,曹志强,李廷举.硬铝合金软接触电磁连铸矩形结晶器透磁性能模拟[J].特种铸造及有色合金,2008(S1):523-526. DOI：

LI Jun1, WANG Tong-min1, CAI Shao-wu1, et al. Numerical Simulation on Magnetic Penetrating Performance of Soft-Contact Electromagnetic Casting Rectangular Mould for Duraluminium Alloys[J]. Special Casting & Nonferrous Alloys, 2008,(S1):523-526. DOI：

摘要

以经典电磁场理论为依据

利用有限元软件ANSYS

系统地研究了三维矩形坯连铸结晶器内磁场分布规律。结果表明:矩形软接触电磁连铸结晶器角部存在明显的磁场叠加现象;硬铝合金液面处于线圈中心位置时可获得最大磁感应强度;当线圈与耐火材料的距离为5

0mm时

能获得最佳磁感应强度;采用不锈钢结晶器能获得更大的磁感强度

是5052铝结晶器的1.5

.0倍。

Abstract

Based on electromagnetism theory

the three dimensional magnetic field in rectangular soft-contacting electromagnetic continuous casting （EMCC） mould is numerically investigated through ANSYS software. The results show that the overlap of electromagnetic flux appears distinctly at the corner of rectangular soft-contact mold; The largest magnetic intensity can be obtained while the free surface of liquid duraluminium alloy locating at the center of induction coil; A prime magnetic intensity can be attained with a 5 mm to 10 mm distance between induction coil and fire-resistant material; Stainless mould can obtain 1.5-2 times magnetic intensity more larger than 5052 aluminum mould.