CAE技术在支撑体金属型铸造模具设计中的应用

张光明; 傅骏; 彭显平

计算机应用技术 | 浏览量 : 0 下载量: 118 CSCD: 2

导出
分享
收藏
专辑

CAE技术在支撑体金属型铸造模具设计中的应用
Application of CAE in Design of Motor Plate Mould in Permanent Casting
2007年第11期页码：836-837
纸质出版日期： 2007 ，
DOI：

扫描看全文

[1]张光明,傅骏,彭显平.CAE技术在支撑体金属型铸造模具设计中的应用[J].特种铸造及有色合金,2007(11):836-837+816.

Zhang Guangming, Fu Jun, Peng Xianping. Application of CAE in Design of Motor Plate Mould in Permanent Casting[J]. Special Casting & Nonferrous Alloys, 2007,(11):836-837.
[1]张光明,傅骏,彭显平.CAE技术在支撑体金属型铸造模具设计中的应用[J].特种铸造及有色合金,2007(11):836-837+816. DOI：

Zhang Guangming, Fu Jun, Peng Xianping. Application of CAE in Design of Motor Plate Mould in Permanent Casting[J]. Special Casting & Nonferrous Alloys, 2007,(11):836-837. DOI：

摘要

利用华铸CAE商业软件对壁厚不均、尺寸大、凹坑复杂的支撑体金属型铸件充型及凝固过程进行了模拟

基于模拟分析结果

提出了浇注系统和冒口系统的优化方案

并采取特殊结构控制好金属液充型状态

缩短了试模周期

保证了模具质量。

Abstract

The filling and solidification of motor plate with large dimension and uneven wall-thickness as well as complicated cavity were simulated by a CAE commercial software in permanent casting.The optimized design of gating system and riser system was conducted

and the filling of liquid metal was controlled by a special structure on the basis of simulated results

which can shorten the trial-mould period and improve the quality of the mould

reducing the casting cost.