T4态CNTs/ZM5复合材料的研究

袁秋红; 曾效舒; 戚道华

复合材料 | 浏览量 : 0 下载量: 93 CSCD: 3

导出
分享
收藏
专辑

T4态CNTs/ZM5复合材料的研究
Mechanical Properties and Microstructure of Carbon Nanotubes （CNTs）/ZM5-T4 Alloy Composites
2007年第12期页码：963-965
纸质出版日期： 2007 ，
DOI：

扫描看全文

[1]袁秋红,曾效舒,戚道华.T4态CNTs/ZM5复合材料的研究[J].特种铸造及有色合金,2007(12):963-965+901.

Yuan Qiuhong, Zeng Xiaoshu, Qi Daohua. Mechanical Properties and Microstructure of Carbon Nanotubes （CNTs）/ZM5-T4 Alloy Composites[J]. Special Casting & Nonferrous Alloys, 2007,(12):963-965.
[1]袁秋红,曾效舒,戚道华.T4态CNTs/ZM5复合材料的研究[J].特种铸造及有色合金,2007(12):963-965+901. DOI：

Yuan Qiuhong, Zeng Xiaoshu, Qi Daohua. Mechanical Properties and Microstructure of Carbon Nanotubes （CNTs）/ZM5-T4 Alloy Composites[J]. Special Casting & Nonferrous Alloys, 2007,(12):963-965. DOI：

摘要

对搅拌铸造技术制备的CNTs/ZM5复合材料进行T4固溶处理。研究了碳纳米管（CNTs）对T4态力学性能的影响规律。测试了T4固溶处理后复合材料力学性能

并利用扫描电子显微镜和能谱分析对复合材料断口形貌进行了观察和分析。试验结果表明

CNTs对T4态镁合金（ZM5）有较强的增强效果。采用镀镍处理后的CNTs能更好的和镁基体结合

其增强效果更为明显

但随着CNTs加入量的过多

都会导致偏聚

使力学性能下降。

Abstract

Solid Solution treatment T4 was carried out on CNTs/ZM5 alloy composites fabricated by stirring casting technology.The effects of CNTs on mechanical properties of the ZM5-T4 matrix composites were examined

and the fracture morphology of the composites was observed by SEM（Scanning Electron Microscope）and energy spectrum analysis.The results reveal that the CNTs can strengthen mechanical properties of the composites.Furthermore

the Ni plating CNTs are better than un-plating CNTs in strengthening effects on the composites

which is attributed to the metallurgical bonding of Ni-plated CNTs with the ZM5 matrix.However

the excessive addition of CNTs would result in the decrease of mechanical properties of the composites due to the generation of segregation.

关键词

ZM5镁合金碳纳米管（CNTs）复合材料T4固溶处理

Keywords

ZM5 AlloyCNTsCompositesT4 Solid Solution Treatment

references

文章被引用时，请邮件提醒。

提交

AlN_p/Al（Mg）复合材料的研究进展

Al₂O₃（p）/Al-Mg复合材料界面微结构研究

反应生成Al₂O₃（p）/Al-Cu复合材料的研究

Al₄C₃的形成及对Gr-Al-Si复合材料的作用