电脉冲孕育处理对Al-5Cu合金热裂的影响

王冰; 王建中; 齐锦刚; 曹力生; 苍大强

实用研究 | 浏览量 : 0 下载量: 256 CSCD: 1

导出
分享
收藏
专辑

电脉冲孕育处理对Al-5Cu合金热裂的影响
Effects of Electric Pulse Moeification on the Hot Cracking Tendency of Al-5Cu Alloy
2007年第6期页码：420-422
纸质出版日期： 2007 ，
DOI：

扫描看全文

[1]王冰,王建中,齐锦刚,曹力生,苍大强.电脉冲孕育处理对Al-5Cu合金热裂的影响[J].特种铸造及有色合金,2007(06):420-422+405-406.

Wang Bing1, Wang Jianzhong2, Qi Jin’gang2, et al. Effects of Electric Pulse Moeification on the Hot Cracking Tendency of Al-5Cu Alloy[J]. Special Casting & Nonferrous Alloys, 2007,(6):420-422.
[1]王冰,王建中,齐锦刚,曹力生,苍大强.电脉冲孕育处理对Al-5Cu合金热裂的影响[J].特种铸造及有色合金,2007(06):420-422+405-406. DOI：

Wang Bing1, Wang Jianzhong2, Qi Jin’gang2, et al. Effects of Electric Pulse Moeification on the Hot Cracking Tendency of Al-5Cu Alloy[J]. Special Casting & Nonferrous Alloys, 2007,(6):420-422. DOI：

摘要

研究了不同电脉冲孕育处理参数对Al-5Cu合金热裂倾向的影响。结果表明

不同电脉冲孕育处理参数均可降低Al-5Cu合金的热裂倾向

处理后该合金热裂临界应力比未处理试样提高了约3倍。合金热裂倾向改善的原因是

电脉冲孕育处理细化了Al-5Cu合金组织

减少了共晶相的数量

缩短了合金凝固温度区间。

Abstract

The effects of electric pulse modification（EPM） on the hot cracking tendency of Al-5Cu alloy have been investigated.The results indicate that the hot cracking tendency can be effectively restrained after treated by electric pulse modification with different parameters.Moreover

the hot cracking critical stress of alloy treated by EPM is increased by 3 times or so than that of the samples without treatment

which is attributed to the grain refinement of Al-Cu alloy and the decrease of eutectic phase in boundary as well as narrow of solidified temperature zone with EPM treatment.