铸造速度对ZL116合金半固态坯料组织的影响

赵大志; 路贵民; 崔建忠

半固态加工 | 浏览量 : 0 下载量: 93 CSCD: 1

导出
分享
收藏
专辑

铸造速度对ZL116合金半固态坯料组织的影响
Effect of Casting Velocity on the Microstructure of Semi-solid Billet of ZL116 Alloy
2008年第S1期页码：371-374
纸质出版日期： 2008 ，
DOI：

扫描看全文

[1]赵大志,路贵民,崔建忠.铸造速度对ZL116合金半固态坯料组织的影响[J].特种铸造及有色合金,2008(S1):371-374.

ZHAO Da-zhi1, LU Gui-min2, CUI Jian-zhong1. Effect of Casting Velocity on the Microstructure of Semi-solid Billet of ZL116 Alloy[J]. Special Casting & Nonferrous Alloys, 2008,(S1):371-374.
[1]赵大志,路贵民,崔建忠.铸造速度对ZL116合金半固态坯料组织的影响[J].特种铸造及有色合金,2008(S1):371-374. DOI：

ZHAO Da-zhi1, LU Gui-min2, CUI Jian-zhong1. Effect of Casting Velocity on the Microstructure of Semi-solid Billet of ZL116 Alloy[J]. Special Casting & Nonferrous Alloys, 2008,(S1):371-374. DOI：

摘要

采用近液相线半连续铸造技术制备ZL116合金半固态坯料

研究了铸造速度对半固态坯料微观组织形成的影响

研究表明

ZL116合金采用近液相线半连续铸造工艺

当铸造速度为150

00mm/min时

可获得分布均匀、细小的蔷薇状半固态坯料组织。

Abstract

The effect of casting velocity on the microstructure morphology of semi-solid billets of ZL116 alloy

cast by near-liquidus semi-continuous casting

was studied. The results showed that the semi-solid billets of ZL116 alloy with the homogeneous and fine rosette-shaped microstructures could be cast from 150 mm/min to 200 mm/min by the near-liquidus semi-continuous casing process.