English Version
轻有色合金 | 浏览量 : 34 下载量: 164 CSCD: 2
  • 导出

  • 分享

  • 收藏

  • 专辑

    • 喷射成形Al-20Si-5Fe合金的微观组织研究

    • Microstructure of Spray Formed Al-20Si-5Fe

    • 黄海军

      1

      蔡元华

      1

      崔华

      2

      何建平

      1

      张济山

      1
    • 2008年第1期 页码:68-71   

      纸质出版日期: 2008

    扫 描 看 全 文

  • 引用

  • [1]黄海军,蔡元华,崔华,何建平,张济山.喷射成形Al-20Si-5Fe合金的微观组织研究[J].特种铸造及有色合金,2008(01):68-71+1-2. DOI:
    Huang Haijun1, Cai Yuanhua1, Cui Hua2, et al. Microstructure of Spray Formed Al-20Si-5Fe[J]. Special Casting & Nonferrous Alloys, 2008,(1):68-71. DOI:
  •  
  •  
    论文导航

    摘要

    用喷射成形工艺制备了Al-20Si-5Fe合金,并利用OM、SEM和XRD研究了Al-20Si-5Fe合金沉积锭和过喷粉的微观组织。通过对比过喷粉和沉积锭的微观组织,分析了喷射成形过程中Al-20Si-5Fe合金中富Fe相的形成机制。沉积坯中富Fe相为短棒状是由于沉积过程中针状富Fe相发生折断所致的。

    Abstract

    Microstructures of the Al-20Si-5Fe alloy perform and sprayed-form powder prepared by spray forming technology were observed by OM(optical microscope),SEM(scanning electron microscope)and XRD(x-ray diffraction).The formation mechanism of Fe-rich phase in Al-20Si-5Fe alloy during spray forming was analyzed by microstructure observation of sprayed form powder and perform.The formation of short rod-like Fe-rich phase in the perform is resulted from the fracture of acicular Fe-rich phase during deposited process.

    关键词

    喷射成形; 高硅铝合金; 富Fe相; 沉积过程; 凝固

    Keywords

    Spray Forming; Hypereutectic Al-Si Alloy; Fe-rich Phase; Deposition Process; Solidification

    文章被引用时,请邮件提醒。
    提交

    相关作者

    刘东明 山东大学材料科学与工程学院
    董盈 黑龙江省区域地址调查所
    王凯 莱芜钢铁股份有限公司炼钢厂
    赵九洲   4. 中国科学院金属研究所  
    刘东明 山东大学材料科学与工程学院
    董盈 黑龙江省区域地址调查所
    王凯 莱芜钢铁股份有限公司炼钢厂
    赵九洲 中国科学院金属研究所

    相关机构

    山东大学材料科学与工程学院
    黑龙江省区域地址调查所
    莱芜钢铁股份有限公司炼钢厂
      4. 中国科学院金属研究所  
    山东大学材料科学与工程学院
    0