铸造γ-TiAl合金组织的尺寸效应

王慧; 张继; 王新英; 宫声凯

轻有色合金 | 浏览量 : 0 下载量: 300 CSCD: 1

导出
分享
收藏
专辑

铸造γ-TiAl合金组织的尺寸效应
Effects of Specimen Size on Microstructure of Cast γ-TiAl Alloy
2008年第2期页码：157-159
纸质出版日期： 2008 ，
DOI：

扫描看全文

[1]王慧,张继,王新英,宫声凯.铸造γ-TiAl合金组织的尺寸效应[J].特种铸造及有色合金,2008(02):157-159+82.

Wang Hui1, Zhang Ji2, Wang Xinying2, et al. Effects of Specimen Size on Microstructure of Cast γ-TiAl Alloy[J]. Special Casting & Nonferrous Alloys, 2008,(2):157-159.
[1]王慧,张继,王新英,宫声凯.铸造γ-TiAl合金组织的尺寸效应[J].特种铸造及有色合金,2008(02):157-159+82. DOI：

Wang Hui1, Zhang Ji2, Wang Xinying2, et al. Effects of Specimen Size on Microstructure of Cast γ-TiAl Alloy[J]. Special Casting & Nonferrous Alloys, 2008,(2):157-159. DOI：

摘要

研究了铸造γ-TiAl合金组织的尺寸效应。结果表明

柱状晶宽度与铸造γ-TiAl合金板状试样厚度成线性关系

在3、4、5mm厚试样中的柱状晶宽度平均值分别为320、436、543μm;层片间距随铸造γ-TiAl合金板状试样厚度的增加而增加

层片组织的层片间距平均值分别为1353、1494、1540nm。同时

铸造γ-TiAl合金的显微硬度随板状试样厚度的增加而减小。试样尺寸的变化改变了凝固过程中的温度梯度

从而影响了试样的组织和显微硬度。

Abstract

The effects of specimen size on cast γ-TiAl alloy have been observed.The results indicate that the average columnar crystal size is 320

436

543 μm with γ-TiAl alloy plate of 3

5 mm in thickness

respectively

showing a linear functional relationship.The average lamellar spacing is 1 353

1 494

1 540 nm

respectively

increasing with the increase of the thickness of the plate.In addition

the micro-hardness of the alloy is decreased with the increase of thickness of the alloy specimen.The variation of thickness of specimen changing the temperature gradient during solidification process is responsible for the change of microstructure and micro-hardness of the γ-TiAl alloy.