5182合金Mg偏析层厚度的控制措施

李太宝

实用研究 | 浏览量 : 0 下载量: 167 CSCD: 3

导出
分享
收藏
专辑

5182合金Mg偏析层厚度的控制措施
Controlling Ways of Mg Segregation Layer Thickness in 5182 Al-Mg Alloy Ingot
2008年第6期页码：417-419
纸质出版日期： 2008 ，
DOI：

扫描看全文

[1]李太宝.5182合金Mg偏析层厚度的控制措施[J].特种铸造及有色合金,2008(06):417-419+405.

Li Taibao. Controlling Ways of Mg Segregation Layer Thickness in 5182 Al-Mg Alloy Ingot[J]. Special Casting & Nonferrous Alloys, 2008,(6):417-419.
[1]李太宝.5182合金Mg偏析层厚度的控制措施[J].特种铸造及有色合金,2008(06):417-419+405. DOI：

Li Taibao. Controlling Ways of Mg Segregation Layer Thickness in 5182 Al-Mg Alloy Ingot[J]. Special Casting & Nonferrous Alloys, 2008,(6):417-419. DOI：

摘要

通过对生产中5182合金Mg偏析层缺陷的分析

确定了Mg偏析层缺陷的影响因素

以及控制Mg偏析层厚度的措施。通过采用双排水孔的LHC结晶器

改善冷却强度

铸造开始阶段

冷却水流量为98m3/h

运行阶段线性增加到239m3/h

保证冷却水流量与铸造速度的匹配性

金属液面高度控制在40mm

Mg偏析层厚度有效控制在1.5～2.0mm范围内。

Abstract

The factors influencing Mg segregation layer thickness and ways controlling Mg segregation layer thickness were described by analyzing origination of Mg segregation in 5182 Al-Mg alloy.Mg segregation layer thickness can be controlled in 1.5

mm by adopting LHC mould with double-water-exhausted pore to enhance the cooling rate and cooling water volume at 98 m3/h at initial stage and increasing linearly 239 m3/h at working stage to ensure the match of cooling rate with drawing velocity as well as controlling height of liquid metal at 40mm.