旋转喷吹法对铝合金精炼的试验研究

张江峰; 刘云; 侯击波

铝合金 | 浏览量 : 0 下载量: 145 CSCD: 2

导出
分享
收藏
专辑

旋转喷吹法对铝合金精炼的试验研究
Experimantal Investigation of Refining with rotating and Puffing Argon Method for Aluminum Alloy
2008年第S1期页码：198-200
纸质出版日期： 2008 ，
DOI：

扫描看全文

[1]张江峰,刘云,侯击波.旋转喷吹法对铝合金精炼的试验研究[J].特种铸造及有色合金,2008(S1):198-200.

Zhang Jiang-Fen, Liu Yun, Hou Ji-bo. Experimantal Investigation of Refining with rotating and Puffing Argon Method for Aluminum Alloy[J]. Special Casting & Nonferrous Alloys, 2008,(S1):198-200.
[1]张江峰,刘云,侯击波.旋转喷吹法对铝合金精炼的试验研究[J].特种铸造及有色合金,2008(S1):198-200. DOI：

Zhang Jiang-Fen, Liu Yun, Hou Ji-bo. Experimantal Investigation of Refining with rotating and Puffing Argon Method for Aluminum Alloy[J]. Special Casting & Nonferrous Alloys, 2008,(S1):198-200. DOI：

摘要

依据正交表

用极差分析法对试验数据进行处理来确定旋转喷吹法的最佳工艺参数

其最佳工艺参数组合:旋转速度为600r/min

流量为0.4m3/h

精炼时间为6min

静置时间为5min。

Abstract

The rotating and puffing argon method is an effect way to decrease hydrogen for aluminum alloys. According to orthogonal table experiment theory

the experiment data were treated with using difference analytical method to obtain the optimal techniques parameters. The optimal techniques parameters: the rotate rate is 600 r/min

flux is 0.4 m3/h

refine time is 6 min and static time is 5 min.