English Version
压力铸造 | 浏览量 : 45 下载量: 230 CSCD: 1
  • 导出

  • 分享

  • 收藏

  • 专辑

    • 泡沫陶瓷过滤器在铝合金低压铸造中的应用

    • Application of Foam Ceramic Filter in Low Pressure Casting Aluminum Alloy

    • 苗怀有

      1

      刘利民

      1

      杨江春

      1

      贺兴君

      1

      张军

      1
    • 2008年第10期 页码:773-775   

      纸质出版日期: 2008

    扫 描 看 全 文

  • 引用

  • [1]苗怀有,刘利民,杨江春,贺兴君,张军.泡沫陶瓷过滤器在铝合金低压铸造中的应用[J].特种铸造及有色合金,2008(10):773-775+735. DOI:
    Miao Huaiyou, Liu Limin, Yang Jiangchun, et al. Application of Foam Ceramic Filter in Low Pressure Casting Aluminum Alloy[J]. Special Casting & Nonferrous Alloys, 2008,(10):773-775. DOI:
  •  
  •  
  • HTML全文

  • 参考文献

  • 出版信息

  • 数据统计

论文导航

摘要

在A356.2铝合金车轮低压铸造过程中进行的应用试验表明,"20ppi"泡沫陶瓷过滤器的整流效应非常显著,能有效地解决铸面裂纹;由于除去了熔体中的大部分夹杂,使得工件抗拉强度、屈服强度和伸长率整体趋于稳定,避免了由于个别粗大夹杂引起力学性能的急剧降低;但"20ppi"泡沫陶瓷过滤器不能滤除比较细小的夹杂,所以不能提升抗拉强度和屈服强度的整体水平,不过个别粗大夹杂的滤出,对材料力学性能的改善仍就十分有利。

Abstract

The purification mechanism of ceramic filter is as follows: obstruction, absorption and rectification effect. The foam ceramic filter exhibits excellent rectification effects in low pressure casting A356.2 aluminum alloy wheel, and the crack in the surface layer of the wheel can be greatly eliminated. In addition, the tensile strength, yield strength and elongation of the wheel keep stable by means of the foam ceramic filter as a result of removing inclusions in aluminum melt, avoiding the sharp deterioration of mechanical properties of the alloy resulting from a few coarse inclusions. However, the tensile strength and yield strength of the alloy can not be obviously improved due to the existence of fine inclusion. It is beneficial for the improvement of mechanical properties of the wheel with the foam ceramic filter due to the removal of the coarse inclusion in aluminum melt.

关键词

陶瓷过滤器; 净化; 铝合金车轮; 低压铸造; 力学性能

Keywords

Ceramic Filter; Purification; Aluminum Alloy Wheel; Low Pressure Casting; Mechanical Properties

文章被引用时,请邮件提醒。
提交

相关作者

易有福 重庆大学国家镁合金工程技术研究中心
龙思远 重庆大学国家镁合金工程技术研究中心
徐绍勇 重庆硕龙科技有限公司
王瑞斐 重庆大学国家镁合金工程技术研究中心
唐晓亮 重庆大学机械工程学院
蒋晓英 浙江工业大学浙西分校机电控制工程系
黄正军 中北大学材料科学与工程学院
肖文丰 首都航天机械公司

相关机构

重庆大学国家镁合金工程技术研究中心
重庆硕龙科技有限公司
重庆大学机械工程学院
浙江工业大学浙西分校机电控制工程系
中北大学材料科学与工程学院
0