The microstructure of beta Ti alloy Ti-11Mo-6Zr-4Sn（TMA） in which some Mo and Sn are substituted by Cr

Fe and Ce was observed by XRD（X-ray diffraction）

SEM（scanning electron microscope） and EDS（energy dispersive spectrumeter）

and the elastic modulus as well as microhardness was measured by CSEM nano-indentation and micro-sclerometer.Furthermore

effects of alloying elements and homogenization treatment on microstructure and mechanical properties of the TMA were described.The results indicate that β phase structure in TMA is independent of the Ce and Fe addition after and before homogenization treatment.Although the dominant phase in the TMA is not affected

precipitation of a little α phase and ω phase can be observed in the TMA alloy after homogenization treatment with Ce and Sn addition.The Young’s modulus and micro-hardness of the TMA alloy are increased with Cr and Fe substituting for Mo and Sn

while they are decreased with Ce substituting for Mo.