单管强冷制备半固态A356铝合金浆料工艺的优化

郑志强; 叶晴; 熊新根; 陈克燕; 王官民

半固态加工 | 浏览量 : 0 下载量: 125 CSCD: 9

导出
分享
收藏
专辑

单管强冷制备半固态A356铝合金浆料工艺的优化
Optimization of Preparation of Semi-solid A356 Aluminum Alloy Slurry by Single-tube with Strong Cooling
2008年28卷第12期页码：931-934
纸质出版日期： 2008 ，
DOI：

扫描看全文

[1]郑志强,叶晴,熊新根,陈克燕,王官民.单管强冷制备半固态A356铝合金浆料工艺的优化[J].特种铸造及有色合金,2008,28(12):931-934+899.

Zheng Zhiqiang, Ye Qing, Xiong Xingen, et al. Optimization of Preparation of Semi-solid A356 Aluminum Alloy Slurry by Single-tube with Strong Cooling[J]. Special Casting & Nonferrous Alloys, 2008,28(12):931-934.
[1]郑志强,叶晴,熊新根,陈克燕,王官民.单管强冷制备半固态A356铝合金浆料工艺的优化[J].特种铸造及有色合金,2008,28(12):931-934+899. DOI：

Zheng Zhiqiang, Ye Qing, Xiong Xingen, et al. Optimization of Preparation of Semi-solid A356 Aluminum Alloy Slurry by Single-tube with Strong Cooling[J]. Special Casting & Nonferrous Alloys, 2008,28(12):931-934. DOI：

摘要

应用ProCAST有限元软件

通过温度场与速度场的耦合

对单管强冷制备半固态A356铝合金浆料的工艺进行模拟

采用的冷却水流量分别为25、50、75mL/s。模拟得到的优化工艺参数是:冷却水流量为50mL/s

出口铝合金的温度约为600℃

出口水的温度约为25℃。用上述工艺参数进行验证

验证结果与模拟结果一致。

Abstract

Numerical simulation of preparation processing of semi-solid A356 aluminum alloy slurry was conducted by the ProCAST software with cooling water volume of 25

75 mL/s

in which temperature field coupling with velocity field was taken into account.The desirable semi-solid A356 aluminum alloy slurry can be prepared successfully with cooling water at 50 mL/s and outlet temperature of aluminum alloy at 600 ℃ as well as outlet temperature of water at 25 ℃.The experimental results are well in agreement with that of simulated ones.