压铸中局部加压技术的开发与应用

刘后尧; 万里; 黄明军; 常移迁; 黄志垣; 徐飞跃; 张百在; 赖道进; 周海军; 区廷安

压力铸造 | 浏览量 : 0 下载量: 193 CSCD: 10

导出
分享
收藏
专辑

压铸中局部加压技术的开发与应用
Development and Application of Die Casting with Local Pressurization for Aluminum Alloy
2008年28卷第12期页码：943-946
纸质出版日期： 2008 ，
DOI：

扫描看全文

[1]刘后尧,万里,黄明军,常移迁,黄志垣,徐飞跃,张百在,赖道进,周海军,区廷安.压铸中局部加压技术的开发与应用[J].特种铸造及有色合金,2008,28(12):943-946+899.

Liu Houyao1, WanLi2, Huang Mingjun1, et al. Development and Application of Die Casting with Local Pressurization for Aluminum Alloy[J]. Special Casting & Nonferrous Alloys, 2008,28(12):943-946.
[1]刘后尧,万里,黄明军,常移迁,黄志垣,徐飞跃,张百在,赖道进,周海军,区廷安.压铸中局部加压技术的开发与应用[J].特种铸造及有色合金,2008,28(12):943-946+899. DOI：

Liu Houyao1, WanLi2, Huang Mingjun1, et al. Development and Application of Die Casting with Local Pressurization for Aluminum Alloy[J]. Special Casting & Nonferrous Alloys, 2008,28(12):943-946. DOI：

摘要

开发了一种多回路、参数调整方便、简单可靠、价格低廉的移动式局部加压装置

成功地应用于复杂压铸件的生产。探讨了局部加压结构形式、加压杆与杆套的配合公差对加压杆使用性能的影响

得到了8mm和12mm两种加压杆的合理公差

提高了加压杆的使用寿命。研究局部加压工艺参数对铸件内部质量的影响

当局部加压压力越大时

加压效果越好;在加压压力一定时

局部加压开始时间短可获得较好的加压效果。采用局部加压压铸技术

铸件的合格率提高到97%以上。

Abstract

We have developed a simply reliable movable-local pressurization set-up with multi-loop and feasible parameters adjustment as well as cheap prices

which was employed successfully for the production of complicated die parts.Effects of local pressurization configuration and fit tolerance between pressurized pin and pin-sleeve on service performance were expounded.Fit tolerance of two kinds of pressurized pin with 8 mm and 12 mm in diameters was determined to ensure the service life.Effects of local pressurization parameters on quality of die castings were investigated.The results indicate that with increasing in local pressure

defects in the die castings can be greatly eliminated.In addition

with a given pressure

short pressurization start time is beneficial for the elimination of defects.Qualified rate of die castings can reach up to 97% by means of local pressurization.